What Have You Done To Your 3rd Gen Today?

Perfect

thanks!

 

I lifted my truck 2” all around with Bilstein 6112’s in the front, Bilstein 5160’s in the rear and Toytec Progressive 3 leaf add a leaf. I wanted to keep the stock rake just with more ground clearance.

Before:


After:


Now it’s the waiting game for my wheels to arrive.

 

Sound dead

Sound deadening would be the 1st step. I did the doors partially and the door panels as much as I could. The more you contain the sound the better. You also reduce road noise which is a bonus. Adding a single sub is not too big of a deal. You would just need to tap into the front speaker output at the stereo(using a line-level adapter) and run the wires under the centre console to the rear. Other TW members have been quite creative with amp and sub installs which should give you plenty of ideas.

 

You’re welcome.

 

I know you wanted to see them installed but they just got delivered. They look even cooler in person than they do on the site.

 

They do look very cool but the open circuit board on the back side would not last through an Ontario winter. Guess I'm stuck with my OEM tail lights.

 

Looks awesome! Did you leave the overload leafs in? If so, how is the ride? Thanks

 

They look so clean in person. I finally got mine in on Sunday after ordering them in October of last year.
I have not installed them yet either since its been raining here the past couple days. Cant wait to get them on though.
They go well with the headlights too. Congrats on the purchase

 

Marrow Guts for .99 a lb. That’s a bargain

 

I will try to get mine installed today and get a picture for you.

 

Do you have part numbers and who did you order from?

 

you have to trim the index notches. I rearranged mine

 

Can't do anything ...-23°C or about -10 Fahrenheit ...the weekend should be warm -7,8°C...or about 20 Fahrenheit

 

I did overlays on the "Tacoma" on the sides and tailgate "V6", and then did the blackout "TACOMA" letters on the tailgate. Both from Amazon I think for less than $50 for both sets. The Tacoma inserts on the tailgate are a decent weight metal.

 

Yeah I went with the weight one for the bed

 

that was my reaction too. I played bass boosted tracks to confirm my listening pleasure. My god I was excited

 

SR5....Please call....because we have some Gamestop shares too.

https://jeffwylerclarksvilletoyota....a-Tacoma-1a74c86a0a0d04fe02c113d303909706.htm

 

I thought of that but I’ve emailed both super springs and headstrong. Ss requested the pic to send to the engineer

the sumo springs or the progressive aal ubolts? I’m sure the ubolts sit on the sumos like the picture. I’m not sure about the aal ubolts but would assume it would be like normal, it was never mentioned and don’t you need additional hardware to do a flip kit? That wouldn’t make sense but that’s not saying much nowadays

 

I’ll see if I can find one of the many past posts where every one I recall installing the sumo springs also used the flip kit which makes sense. What doesn’t make sense is they wouldn’t mention that on their website.

 

I’ve seen a couple sumosprings that were mounted on the frame but I think that was a 1stgen or maybe 2nd