What Have You Done To Your 3rd Gen Today?

If you do, I'd appreciate it! If not, no big worries. TIA!

 

It looks like the ubolts are suspect to me. Simple test, see if the base of the sumo springs are wider than your leafs or if the ubolts are wide enough to fit over the leaf springs and sit flush.
I have the sumo's and re-used the stock u bolts

 

Nice! I’m considering the same ones.
Diggin the skid plate too! Well done!

 

If you order the Suburu tweeters, I'd recommend getting them from Bam whole sale parts search "HF631SFJ101." It was about $15 cheaper vs. Amazon. And if you use code "MINUS20" it knocked 20% of shipping. It's not a whole lot, but it's something. And they didn't charge me a sales tax. So I consider that a win.

 

How did you mount the fire extinguisher?

 

The hitch/ball that you have in luggage net bag - does it tear it, or stay ok?

 

Looking for the original post. Only found this picture.


Used this stuff from Amazon. The bracket was on sale for Black Friday. Modified the mount that came with the extinguisher using rivet nuts so it would connect directly to the bracket.

 

looks like this one

https://www.extremeterrain.com/drak...iN_fXlBSUo2V4G0F0rMaAjdSEALw_wcB&gclsrc=aw.ds

 

My wife made a taco dog bed for the platform I built for our pup

 

That net is from an old highlander. It’s from 2003. It’s been around and stood up to abuse for years. Elastic at the top. No issues with ripping The skid plate hitch is from warfab. I just toss random stuff in that net depending on where I’m going. Works for all kinds of stuff.

 

Show me your aftermarket fender flares. All angles!

 

Similar but that one is a bit more expensive. Got it on Amazon for $19. Looks like it’s $24 now.

(1 Year Warranty) Universal Vehicle Quick Release Adjustable Fire Extinguisher Mount Holder For Jeep Wrangler and UTV Polaris RZR Ranger Camper Van with Pillar

$19 Universal Adjustable Quick Release Roll Bar Fire Extinguisher Mount Holder Compatible with for Jeep Wrangler Gladiator Ford Bronco UTV Polaris RZR Ranger Camper Van ATV

https://www.amazon.com/dp/B07VQ41J2...abc_49A5XY846K2EJCYKFXEK?_encoding=UTF8&psc=1

 

Awesomeness!!!

 

That’s a great setup. Nice dog.

 

Got some new tires...bfg ftw

 

I love finding overstock new stuff at Goodwill

 

If you don't mind me asking, but what exactly happened?

 

I will check it tomorrow on the stock leafs tomorrow (not sure why it didn’t cross my mind). Forshits n giggles I put them against the progressive aal and the sumo brackets are the same width and the ubolts are snug (literally no wiggle room like I think the stock does) and the inner bend on the bolt contacts the edges and sits slightly higher than directly on top/flat (now that’s on the aal so I’ll check the stock pack to be sure but sus the same).

headstrong sent ome53a ubolts in their kit- those measure length 7.25” long. I thought I seen the stock length listed somewhere since research on this, I’ll try and find it again. Anyone know of another brand that retains the stock ubolt width?

 

Did they fix it or say it is not under warranty?

 

Took this picture. Taco was wet.