Colorado Trading Post

ISO: 3rd gen DCSB cab-high topper/camper shell within 1.5 hrs of Denver area. Truck is MGM but could do black as well.

 

You can set alerts on there. I just bought a March spot and sold my July spot. The close dates go quick, but if you refresh it often, you may get lucky.

Someone has a March spot right now, but he's trying to turn a 1k profit off of it. It is at the old rate though, so in theory, even if you paid him 1k for his spot, the math would be the same in the end (the new spots cost $500 more, and his 500 deposit would stay with it.

 

Tailgate not up for sale or trade. Tonneau cover, Co2 tank and bumper are.

 

Anybody need a set of good condition 5th gen 4runner rotors? Just swapped the wife's over to powerstop. They've never been turned and have some good life left.

Free to a good home. Located in castle rock. I wouldn't say no to a box of 9mm or a few beers if you must, but free means free if you're ok with that.

 

SOLD

 

Anyone have any ridge cap or three tab shingles lying around? Building a chicken coop, and only need ~6 ft worth for the ridge line, doesn’t really make sense to buy a 20-40ft pack from the big box store. Preferably black or dark grey, and in the north Denver metro area (I’m around 36 and 104th). Thanks!


EDIT - snagged some from a neighbor, should be set.

 

I think I have some from when I built my shed this summer, in black, but I’m up in Silverthorne if you ever come up skiing or whatnot. I’d have to double check, I would’ve used 8ft worth or so.

 

Bumping this to get some more eyes on it now that we have 5 people on the list...

 

I might be interested. Could throw some beer at ya for them. Thinking of putting larger brakes on my 3rd gen and heard 5th gen 4runner stuff swaps right over if you have 17" wheels, which I do

 

You may be in luck. My 2nd gen (i have front rotors left over) have Lexus 470 calipers and rotors. You can have your pick up 5th gen 4runner or Lexus 470 rotors...both are in decent shape, never been turned, but I'd recommend it before you swap them over. About 100k on each rotor, but they are in good shape, no warping or cupping

 

Anyone have a set of bed stiffeners they want to get rid of?

 

I wouldn't be up that way until next weekend, probably (13th/14th), but I'll hit you up if I can't find anything before then, thanks!

EDIT - snagged some from a neighbor, should be set.

 

Anyone got a good place to take some wheels to be sand blasted? Looking to refinish some 4Runner 5 star wheels for my first gen. Have called a few places near me in Loveland, and seems like $200 is about the going rate.... Does that sound about what it should run no matter where I take em?

 

@Kerbouchard! or anyone else, I have a new set of bed stiffeners from SOS offroad concepts. SOLD

 

Take them to a powder coater and have him get them blasted and then powder coat them. He'll be able to get the blasting done way cheaper than you will. It'll probably cost you 200 bucks all in.

You'll never be able to do a better paint job than powder coat.

I think I paid like $300 or $350 to get rock sliders and a swing arm bumper blasted and powder coated.

I use Tony at Premier Powder Coating, he's a pleasure to deal with.

 

@Madjik_Man where did you go? @Spheric14 got an extra for him?

 

Senior @Madjik_Man I also may need to enlist your services for blast and powder coating some wheels if possible.

 

Don't have an extra, only the 4.... saw another set with snow tires in fort collins for $250 on FB market, though

 

I am actually going to check out a local place here in Berthoud tomorrow (PC shop) called Northern Colorado Custom Coatings. Seem to get good reviews online. I have set of awning brackets that need coated. There appears to be good places everywhere though. One in Loveland, another in Longmont as far as NoCo.

 

Take a look in this thread https://www.tacomaworld.com/threads/powder-coating-in-denver-area.599065/

It's been a while, but I had a good experience at a place in Longmont called Premium Powder Coating. IIRC media blasting on the sliders was around $100 and media blast and powdercoat on 5 wheels was around $100 each.