CBI moab 2.0 bumper

Just had my cbi moab 2.0 bumper installed and there seems to be a portion of the support beam visible . Is this normal or is there a way to hide this ?

 

Looks relatively normal, there needs to be at least a 1/2 gap so the bumper and your fenders don't make contact or your fenders can crumple.

Could possibly be adjusted up some the mounting holes should be slotted a little for that.

Do you have a body lift or the "universal" core support bushings installed?

Only way I could think to hid it if it really bothers you that much would be some rubber flexible strips.

 

Granted we arent the manufacturer but that looks like a bumper designed for an 05-11 mounted on a 2012-15 front end

 

Thats a pretty bad mistake If that's the case . What makes you think it's the wrong year ?

 

Yeah I do have a spacer lift Mayne that could be causing it?

 

If you have a body lift that would be it

 

Okay thanks for your help. I plan on getting a better suspension set up in the near future. That beam just takes the whole look away from it if you ask me

 

Sick bumper. Is that the Cloverdale shell?

 

I was wrong, see Relentless' post below.

I see what you mean, but it looks the same on their website.

https://cbioffroadfab.com/product/toyota-moab-2-0-adventure-series-bumper-2005-2015-2/

No tabs/ears for the headlight voids.

 

the guy pumping his gas looking at you taking the pic is hilarious.

that is definitely 05-11, please sell it to me for proper disposal. Haha. Just kidding I have no idea. But I’d buy it from you in a heartbeat!

 

Body lift meaning, you lifted the cab not the suspension. I agree with you, just doesn't look right. I think the bumper can come up a bit more.

 

Yeah i did the rough country lift with a spacer on the front coils

 

Not too sure to be honest

 

Coil spacer lift is very different then a body lift.

A body lift would cause a gap, a coil spacer lift wont.

 

Okay hmmm . Kinda weird . I messaged the guys who installed it so I'll see what they say

 

I must have a bad eye because I can't really tell the issue. In other words, it looks fine to me. Do you have another picture of the front?

 

I'll have to take one after work today. And I'll post it in the daylight

 

Here's what I was referring to:
05-11 (center drops down under grille)


2012-15 (flat across the whole top/center)

 

Nailed it. He got the wrong bumper.

 

Use it as a feature, stick a light bar in there.