Ontario BS Thread

For what it is worth, they gave me lugs that worked for me... they appear to be the right ones for the wheels. I will double check and take a picture for you.

 

255’s may be the best medium. Get the height without the width. @Shveet is fitting 255’s on stock ride with minor trimming.

cab mounts aren’t to bad. Have done a few for people. I get chopping off parts of your frame isn’t for everyone though. Always best to not, but shit happens.

 

i barely just rub, at 80% turn, against my cab mounts with 33" on stock TRD OR suspension with a SSO slimline hybrid bumper and Full RCI plates in the front (So i'm heavy and low)
Only damage that's visible for the cab mount is that i'm rubbing paint off and that's about it, I had the 33"s at Ardbeg that just passed and hadn't heard it rub at all.

Had to bang in the pinch weld, trim the OEM black fender flare, heat gun the inner wheel well to fit everything without other issues, and cut the OEM mudflaps, This is stuff you don't really have a choice to do. like... at all. (well except the mudflaps if you remove them and get something different)

Anyways pulling this off my build thread; since this is what i daily

• PRO COMP 16" 7069 series (-12mm offset, 6 on 5.5 bolt pattern, 16" by 8" wide, rim (+20lbs/rim)
• With tires (+~59lbs) https://www.tacomaworld.com/threads/shveets-build-thread-clementine.619286/page-3#post-24133311

@Snail81 has a similar size of Cooper ST MAXX tire; IIRC it's a 265/80R16 which is just a hair shy of 33" (32.7") with a 2-3 inch OME lift without any rubbing from the sounds of things.

if you want to completely avoid CMC, you're next best bet is to get UCAs and push caster on your alignment forward so when you turn int. you avoid any mess

 

37"s on a Raptor?

 

Can do 37’s on his truck....don’t know what the big deal is

 

King of the Hammers qualifying if you want to get nothing done this whole afternoon

 

aww shit. well i got CAD work to do and a phonecall at 3pm...

 

Apparently I'm running both title sponsors on my truck - an Optima battery and a Lasernut-built bumper

 

I swear you ran an ARB bumper...

 

With firefox's picture in picture.

 

Lite Brite couple going 5th in qualifying, should be fun to watch!

EDIT: They posted a good time! Wonder if it'll be in the top 10.

 

35s is the new 33s, get real.

fuck ya! 37s or bust

see you this weekend for fitment!

 

Just want avoid any issues with the dealer and warranty.
That being said I took the first step today....

 

Just have to think about what the warranty covers.

I had full suspension change, to 5100's and I cut the fender and added a snorkel.

Did not stop them from replacing a torn CV boot under warranty. Never even blinked at any of my mods or upgrades.

 

Cutting frame doesn’t void warranty necessary. We’ve seen guys getting new frames with drop bracket lift kits etc.

 

Nice colour, that's going to look gorgeous.

Also depends on the stealership. Some will refuse but IIRC Toyota mentioned something that dealers "have to" warranty modded trucks, but don't quote me on that, I remember reading something about it once last year.

 

Give me a couple of years. I need alot of other stuff first but 37s are in the plans.

 

If you're planning for 37s. might as well plan for 40s because it can't be that more expensive