What Have You Done To Your 2nd Gen Tacoma Today?

I got this utility/trash bag for my tailgate..meant for a spare tire mount but this works just fine.

 

What ditch light brackets are you using? Do you have any interference wit h the snorkel?
Thanks

 

I just finished up some routine maintenance for the first time on the newer truck (other than oil changes).

Rear diff and manual transmission fluid change. Oil looked pretty clean actually.

Front diff and transfer case in the next few days.

Its a 2015 that I've had almost 1.5 years. 82,000 miles

 

Getting ready for HC bumper

 

Added a 2nd Pelican case. Exciting i know

 

Took it out for a spray off and took some pavement pictures should have gotten some before shots but you could hardly tell the color of the truck because of all the mud on it
Instagram @_stealth_taco_

 

No but I'm getting my CMC done next weekend, so I'm going to get an extractor kit to get it out at the same time. It's a good thing to have anyway.

 

What headlights are those? Sharp build, love the pelican cases.

 

@kustom54lighting and they actually have a group buy going on right now. Awesome lights couldn't be happier. Thanks!

https://www.tacomaworld.com/threads/retrofit-headlights-group-buy-05-15.705647/

 

Installed a ton stuff mrrs from @Crikeymike total chaos lowers timbren bump stops out tie rod ends sway bar end links and bushings new cam bolts

 

Went out with a few local TWers on a trail ride outside of Albuquerque and got a little flexy.

 

Just be careful, my friend did this with his frontier and it rubbed the clearcoat off after a few weeks off bouncing around and shifting a bit.

 

Wish mine came with it. It's about 1500 to get it installed around here. Or 800 for the covers and do it myself. Would you pay 1500 for it?

 

No clue what the install entails, but I’d probably just pay for the install. It’s so worth it, way better than clazzios or any other covers.

 

1. It all started from noticing my trans leaking thought it was the plugs but it was coming from the top. Shifter got loose. Then ended up almost rewiring my whole truck lol. But shifter feels way better again, way easier to find gears!

 

Truck looks sick. The only thing missing is a .50 cal mounted on the top. I've got a set of S2's ordered too, can't wait to put them on.

 

Replaced my clock spring, upgraded to diode dynamics flasher relay for one- touch turn signals and strobing hazards and replaced my shift knob. Also started adding USB outlets into the center console but ran out of time (and wire)

 

If I had one to mount up there I'd be all for it.

 

Cali raised low profile. So far they look like they'll work out fine. I haven't had a chance to really use them yet other than just playing in the driveway.

 

I ordered a set of SDHQ. These two brands seem to be the lowest profile on the market and kick the light pod out the furthest in front of the A-post. Your setup looks really good on your truck.