AZ BS Thread 4²0

it's barely broken in!

but yeah, i looked it up yesterday and that's too much money for that many miles IMO

 

I have two brackets for the fog lights on my Pelfrey bumper that stress cracked. They need new brackets and tacked. I know why they broke. Minor design issue.

 

I could maybe, maybe see it if it was one owner who kept meticulously detailed maintenance records for every oil change and every major service, the paint was immaculate, mechanically completely unmodifed, a desirable options package, utterly untouched by a body shop, and the stars aligned.

TL;DR that’s an ask for a .01% car you can drive home and park in your driveway and just grin without ever thinking “what does it need?”

 

My machine should be able to do that. Pics would be cool.

 

Oh hey speaking of fabrication... other than @XPOTRPR do we have any CNC warriors?

Need a little shoulder adapter for two rifles & their suppressor mounts I need to get made. One is pretty simple, basically gonna be a tool steel washer about .109" thick. Wacky Belgians and reverse threads plus extended barrel crowns mean American made flash hiders don't seat right.

Other one might be a bit more complex. I have a brake with an internal taper and a barrel with an insufficient shoulder to mate with it:

My shoulder diameter is .699" so I'd need something to mate with that internal taper and/or another "washer" to bring that barrel shoulder to .735"

Flatness and parallelism is going to be super important because of the fact that a big expensive inconel can is going to stick off the front of these. I don't want to shoot the inconel.

 

@six5crèéd hes not in state but may be able to help ya

 

I’ll get some pics this weekend

 

It did look absolutely perfect on the outside, flawless other than the headlights. Even the factory wheels looked brand new.

 

Bored, anyone up for Smiley Rock run today? From North to South, to end up in Jerome.
Edit, 6 February

 

@Nitori I'll look into this more when we get back from KOH.

 

Gonna be at the Maverik in Chino Vally at 1130 for Smiley rock trail

 

Lol. Blew a CV.. luckily in the one spot I get service to share with you fine people... Torn down. Waiting for parts. Literally seconds after winching a jeep off the side of this hill to keep him from rolling...

 

Pic won't post

 

Pic won't post

 

Did Smiley rock trail. It wasnt all that hard, not sure why its rated difficult. The hardest parts were spots where you'd slide on the ice on rocks. But if dry, no biggie.

 

Did you run down in the wash the whole time?

 

I didnt do the wash with the pinch point right next to smiley rock. Downed tree with no way to get out before or bypass. The wash section after smiley was not bad. Just slippery on the rocks is all.

Edit: I cant type

 

Took about 3 hours to get it done including waiting 2 hours for the part run. Just hung out and watched people play and get stuck.

 

Wow, that looks nuts! Pretty bad ass you were able to fix it out there man.

 

Lol. Yeah, unfortunately this wasn't my first rodeo. Can knock it out pretty quick. The sand was a new one tho.. what a PITA.