2020 Tacoma OEM LED Headlight Megathread

Perhaps you might consider sending the SR5 harness to @Puppypunter who is working on his own solution to that one? Just in case it gives him any added information based on Mike’s design choices. That could in turn help the community if we reach a final plug and play best practice solution to LED for SR /SR5.

 

PM sent. I am really curious about the SR5 harness.

 

SR5 harness spoken for. I will locate both in my garage this weekend, contact the two who PM'd me and send them out.

 

Found both and plan to mail them to the two who asked, free.

Just glad to get them used.

Just paying it forward for all the help I have received from so many on this forum.

 

Question! I have a 2020 TRD Sport that is setup with always on DRLs. In looking to get into the OEM LED Headlights will I run into any issues with the switchback turn signals?

Also, anyone have the below and can confirm they are in fact not sequential turn signals?

81110-04290
81150-04290

I don’t have a Pro so would prefer not to get the pro headlights but do like the sequential turn signals

thank you!

 

That is what I got for my 2019 TRD OR. Both labeled PRO and non labeled PRO are sequential turn signals...

 

I have a Pro " TRD" Passenger side HL and a Non Pro DS they are both sequential

 

@Koolbreeze7 @MiTacoTRD

are either of you setup with always on DRLs? I just want to ensure they’ll work as my truck found it’s way from Canada—Seattle—Phoenix

I know the Morimoto XBs don’t work with always on DRLs just want to ensure that’s not the case with OEM

 

My DRL's are not "Always on". maybe @Novtec4me can help with that question or @caribemakara

 

If my DRL stalk is ON, the DRL turns on as soon as I start the truck.
DRL stalk OFF, the DRL stays off OFF. Wether the truck is running/on or off.

 

thank you, both! I’m pretty sure they’ll work but want to make 100% sure they will as I have no ability to turn off my DRLs. Hopefully I’m just overthinking it

 

I just did this install on my 2017 limited. Led sequential headlights non pro. With the harness they work great.

To answer your question they are sequential, no issues converting

 

You will not be disappointed. I’m glad I did this mod to my 2019 OR. Also check your aim after install to really take advantage of this nice HL. I had to aim mine up a little bit. I was able to turn the adjusters by hand. Most people didn’t have to adjust the aim. So far, I haven’t been flashed. Good luck with the install. Remember you don’t need to completely remove the front bumper. Some people have...let us know if you have any questions on install.

 

Thank you, sir! Yes, this is the one mod I’m completely stoked about. It will completely change the look of the front end plus add the performance of the OEM headlights

 

Like I said, unbelieveable difference coming from the stock projector

 

I just did mine and didn’t see a way to take it off without removing the bumper. How do you remove the screw underneath the bumper?

 

You just lift it up after removing the fasteners and bolts by the fenders. Just to give enough room to fit the 10mm socket with extension. Let me see if I can find the video somewhere...

 

I want to do
This upgrade to
My 21 didn’t know it was only a 400 dollar option and mine doesn’t have them they should just come standard, how much is the pair?

 

usually can be had for @$1350.00 plus the harness @$60.00

 

thanks, is that any Toyota dealer price? Where do I get the harness? Will everything work the same as a truck that came with those lights from the factory?