What Have You Done To Your 3rd Gen Today?

Making some progress: Replaced my 1/4" template with the 3/4" Birch panel, got both the front and rear railings mounted, cut and fit the diamond plate fatigue mat. I need to get some more 3/4x1.5 aluminum for the side rails which I will use to "Clamp" the fatigue mat in place. Also getting some aluminum angle which will thru bolt to the bottom to provide "edging" around the birch, probably 1x1 or 3/4x1 depending what is available. Added a dense foam strip to the top of the channel for the front of the deck to rest on. Working on mounting points next, and then finishing item like radius a few corners, etc.

Does anyone know how well the Noico sound mats stick to wood? Thinking about putting that or similar on the bottom of the deck if I don't use the fatigue mat material.

 

I'd like to get them out for any kind of camping. Joshua Tree sounds like a good spot right now to not have to deal with snow. Thanks.

 

There is a lot of snow right now. Might give Joshua Tree a shot. Thanks.

 

That’s clean work!

 

Put the bolt in backwards maybe ?

 

Both nuts go to the outside if I remember correctly...

 

thx man.

 

Finally after 3 years I threw on some 265/70/R17 Duratracs.
Also added Cali Raised side projector Pods.
Slowly making my overlander dreams come to reality.

Ive got TRD pro grille and blackout side markers coming this week. Will update next week.

 

Yeah but 51° in Florida is much colder than 51° everywhere else. It’s the wet air.

 

That picture is rad

 

I agree. My cmc looks like shit compared to his.

 

All are open

 

I thought mine looked really good until I saw this lol

 

Thanks!

 

That tri-fold looks good.

But I'm all about that damn nice TALL garage door opening!!

 

I would love a cold 51 degrees right about now

 

where the HECK is that? It is 65F here, and we have the heater and fireplace full blast!!!

I even remote started the truck, and put on seat heaters, before going out to buy the goat feed today

 

You spoiled Californians (only when it comes to weather). Come to Atlanta and then complain to me again about your weather.

 

I do visit Alpharetta yearly. Mugginess isn't for me though

 

I love our guy @MESO.
But his white map lights were a little too bright.
So I added an LED dimmer to the circuit.
Finally I have dimmable interior map lights.


Thanks to @s7726 , @daveeasa for panel parts to make this possible. This mod wasn't easy for me.