Redside Electric Plug-and-Play Switch Illumination Harnesses

Looking forward to seeing what you’ve come up with!

 

ECT PWR / AUTO harnesses are in stock.



The rest of the offerings will be available early next week.

Just a heads-up I will be fishing (more like rowing while others fish) for 3-4 days starting tomorrow. I’ll get back to everyone when I can.

 

Ha! That's actually why we have drain holes in the fish box. Catch a steelhead first thing in the morning on a 20 degree day... 8 hours later you'll have a popsicle fish stuck to the box Rookie move. Now the only thing that looks like that after a trip are my feet.

 

Somebody say steelhead?



I gave up on winter run steelhead. Drifting in sub-freezing Temps while the eyelets on the rod freeze over, all the while hoping for maybe 1 bite per day... sucked too much. I stick to summer run only.

Rowing, huh? You must be in a drift boat. Are you side drifting? Plunking? Rolling plugs?

Good luck! Hope you bonk some fish.

 

True, winter fish tend to be beauties compared to summer. The fish below, my buddy (boat owner) hooked it and I reeled it in and landed it... probably the prettiest fish I've caught. Unfortunately it was a native, so back into the water she went.

 

I have a 2017 TRD OR Access Cab AT. Do you have a T harness so tap into the illumination circuit for the overhead console?

 

Yep that would be the R44 connector (first page). All 3rd gens have them. It powers the overhead console assembly.

 

I'd be interested in two sets of three linked AOB harnesses.

 

Got my ect/auto harness super fast after ordering. They look great. Now to put them to use. Thanks!

 

Can I get on the list for a left side (cargo light) switch?

 

I'd like to just leave a review here for @kmorgan3. My third separate order from him will be here today (a day early). Everything so far has been on point for quality, even though it will be several weeks before I can test anything. They all look great. Shipping speed is great, and communication stellar.

 

I know you said "All 3rd Gen Tacomas" but I'm asking anyway: Does my Access Cab have the wiring for the Cargo Light switch even though there is no cargo light since the 3rd brake like is from the 2nd gen Tacoma?

 

Pull the cubby panel and verify for yourself...

 

Thank you for the kind words!

I drive an access cab (2019) and don't have the switch but the connector is there. I know on the 2020's it's still there behind the plastic cubby. Let me know about the 2021's.

 

I'm in for a cargo light switch harness please

 

I'll take a cargo light harness and 2 daisy chains please.

 

Sent you a PM, Kyle

Pops

 

So question, sorry if this has been answered but there's 9 pages of comments that I skimmed through. You have the red (dash Illumination) and the black (ground) wire chained/ran together, My wire harnesses coming in have the black wire (ground) on them, but no spot for the second red wire (dash Illumination) which is where I just tapped an add a circuit at the tail light. What would I do with the ground wires coming in from the ditch lights and the light bar if I use this? Would it be easier to just chain the red ones?


Disclaimer: I can't read