Texas Classifieds 2.0 - Read Post #1!

What's this about? My gal and I are looking for a fun elope.

 

I have a RTT, Canopy and Bed Rack for sale if you’re serious. It’s a Smittybuilt Tent and Canopy mounted on a Rago Fab Ultimate BedRack with the aluminum side plates. PM to discuss details.

 

Yep it’s legit, send me a message if you’re interested.

 

Gen 2 or gen 3, same sht, just different fabric material.... Also don’t even bother with the canopy, shit is a hassle. Would understand if you got a big family or staying in one place for days at a time

 

Yeah super bright--- The ones I put on suck compared but eventually I'll upgrade all my lights. I love the LED halos on mine. People hate driving in front of me and always think my brights are on when they aren't. The lift doesn't help either lolol.

 

Yeah

 

Stuff off my 2020 TRD ORDC -- all under 8k miles - FOGS ARE SOLD-- i removed from list

1. 3" lift kit: 3” Black billet Spacers and 2" blocks w Differential Drop and Extended Ubolts from Supreme Suspensions - 8,000 miles - $100
2. TRD Off Road Rear Bilstein's - 2,500 miles - $120
3. TRD Upper Control Arms - 2,000 miles - $150
4. Assorted bumper parts - removed when I added my @victory4x4 front bumper - 3,000 miles:
   • Bumper Impact Absorber - $30
   • Bumper Impact Bar w/ brackets- $100
   • Grille, Front lower (black)- $30
5. Assorted Ubolts - $20/pair
6. Factory Ubolts - 2,000 miles - $20

 

In Oklahoma but have 16” SCS Ray 10 wheels with 285/75r16 KO2 tires. $1,500. Custom TRD decals (that can be removed). This package will run close to $2,000 new, mounted and balanced. Can split the wheels and tires up if so desired. $800 for the wheels. $700 for the tires. Tires and wheels have 5k miles on them. Wheels have some rock rash but had a body shop touch them up. Could possibly do some trading for Tacoma stuff, hunting stuff, pew Pew’s, or maybe tools.

I can meet at the Oklahoma/Texas border on I-35

 

Price?

 

I recommend reading the first post. I've even made it easy for you by leaving the key parts in the above quote of the first post. Mods are frequent around these parts.

 

bump

 

Stromung Tucker catback 400$ local pick up Houston. Sold



Sold

 

That is the most spotless undercarriage I’ve ever seen

 

thats what she said

 

I will also trade for the trd pro cat-back

 

Good morning to all,

I have been working for the past few months on a new product for Double Cab Taco's (both 2nd and 3rd gens). I am pleased to announce they are finally ready after multiple design iterations to ensure a perfect fit in multiple different configurations.

What I have created is a platform constructed 100% out of ABS that is custom fit for our backseats to give you a flat surface once the seats are folded down. This serves multiple purposes such as protecting your seats fabric/leather when your pets are riding inside (hair/claws/etc.), or a flat surface for carrying gear that increases the amount of usable space in the backseat (which also protects your seats), and many others.

The platforms come in two configurations, a full length (covers the entire width of the backseat and weighs right at about 20 lbs.) and a half length (covers the 60% seat when folded, allowing you to still leave the single seat in the upright position if you needed to carry dogs/gear etc. AND carry a 3rd passenger, and weighs right at about 12 lbs.). Like I mentioned earlier, they are constructed 100% out of ABS and install/remove in less than a minute so can easily be taken out if you need to re-deploy your seats in a hurry. Since it is constructed out of ABS, it is also 100% waterproof so can be tossed in the bed of your truck no matter the weather conditions. This is also beneficial if used frequently for pets or dirty gear, as it can be cleaned quickly just by spraying it off with a garden hose.

Each platform will come with specially designed "pop locks" that slide over the seat latches to ensure the platform will not fall forward and fold itself up in hard braking or bumpy conditions.

Please see attached pictures and check out the website I have created as well at www.platz-form.com. I have a couple of each size available right now and more are on the way. I am located in the Dallas/Fort Worth area of Texas for local pickup but also can ship to anywhere in the continental U.S. Each platform ships FREE!

Full Length - $325.00 shipped
Half Length - $225.00 shipped

Let me know what you think and if you have any questions! I also have threads in the B/S/T sections for both 2nd and 3rd gen with more info answering questions including a video showing ease of install. Thanks for looking.

https://www.tacomaworld.com/threads...r-double-cab-tacomas-full-half-length.707144/
https://www.tacomaworld.com/threads...r-double-cab-tacomas-full-half-length.707145/

 

I like this. My concern is how slick is the surface and the items sliding on it when you stop or turn. Ie. Tools bag, box etc.

 

It is not perfectly smooth, it's kind of like a bedliner finish but the spray on wavy type vs the sandpaper type. If that makes sense. I can take a close up of the texture if you'd like. I have found some things do slide a little and others stay put. It also depends on the material of the item and how fast you like to take turns.

 

Have you looked into any sort of anti-skid material to include on these? I love it for the dogs to have a platform, but they'll need some traction to not slide around. I tried folding the seats down, but the plastic back there didn't provide enough grip for them, and I'm guessing yours is similar?

 

I actually built this specifically for my dogs. I have a Belgian Malinois and a Dutch Shepherd. They ride back there on the platform weekly. If their nails get too long, they end up sliding a little more. However if their nails are properly trimmed, their paws grip the ABS pretty nicely and they're able to stay solid through turns and braking.