DFW BS Thread : ********NEW MEET!! CHECK POST #1*******

Gee whiz fellas, it's dark, 31°, with a light drizzle. Let's all do 80mph while tailgating each other on airport fwy, like the mental giants that we fucking think we are.

 

Slower traffic move right.

 

Nasty out here just built a fire. Everything icing over

 

It’s not bad in town, at least on my way in. Roads were all clear.

Remote start was worth it.

 

We’d to get one of them

 

Yours is cheap!
https://accessorides.com/products/2...start-kit-100-plug-play?variant=9166994767929

 

Not bad

 

Good morning to all,

I have been working for the past few months on a new product for Double Cab Taco's (both 2nd and 3rd gens). I am pleased to announce they are finally ready after multiple design iterations to ensure a perfect fit in multiple different configurations.

What I have created is a platform constructed 100% out of ABS that is custom fit for our backseats to give you a flat surface once the seats are folded down. This serves multiple purposes such as protecting your seats fabric/leather when your pets are riding inside (hair/claws/etc.), or a flat surface for carrying gear that increases the amount of usable space in the backseat (which also protects your seats), and many others.

The platforms come in two configurations, a full length (covers the entire width of the backseat and weighs right at about 20 lbs.) and a half length (covers the 60% seat when folded, allowing you to still leave the single seat in the upright position if you needed to carry dogs/gear etc. AND carry a 3rd passenger, and weighs right at about 12 lbs.). Like I mentioned earlier, they are constructed 100% out of ABS and install/remove in less than a minute so can easily be taken out if you need to re-deploy your seats in a hurry. Since it is constructed out of ABS, it is also 100% waterproof so can be tossed in the bed of your truck no matter the weather conditions. This is also beneficial if used frequently for pets or dirty gear, as it can be cleaned quickly just by spraying it off with a garden hose.

Each platform will come with specially designed "pop locks" that slide over the seat latches to ensure the platform will not fall forward and fold itself up in hard braking or bumpy conditions.

Please see attached pictures and check out the website I have created as well at www.platz-form.com. I have a couple of each size available right now and more are on the way. I am located in the Dallas/Fort Worth area of Texas for local pickup (or if you want to see one in person) but also can ship to anywhere in the continental U.S. Each platform ships FREE!

Full Length - $325.00 shipped
Half Length - $225.00 shipped

Let me know what you think and if you have any questions! I also have threads in the B/S/T sections for both 2nd and 3rd gen with more info answering questions including a video showing ease of install. Thanks for looking.

https://www.tacomaworld.com/threads...r-double-cab-tacomas-full-half-length.707144/
https://www.tacomaworld.com/threads...r-double-cab-tacomas-full-half-length.707145/

 

Hit a little ice on the Lake Worth bridge around 4a. Nothing too bad thankfully.

 

Grapevine/Lewisville is bone dry

 

Only an option for the 60% side and no option for the 40% side? Thanks.

 

Sawzall?

 

I have had others on my other threads request a 40% as well and told them over there it would be easy enough to make, just didnt know the interest in a 40% was there. May be coming soon!

 

Gets worse as ya go towards Jacksboro

 

GF hit ice on the Saginaw/Main exit around 1a this morning. Just kind of coasted to the bottom.

 

We just gonna stay here today and chill

 

thats my plan

 

Hopefully the drive home isn’t bad, but we’ll see.

 

Am I the only one that sees things like that and secretly ponder which category this guy fits in; does he have income so insane it doesn't matter or is he financially incompetent?