What Have You Done To Your 2nd Gen Tacoma Today?

you'd be better of doing the boot slide mod.

 

boot slide and when they blow, buy cvj high angle axles

or

lower lift

 

You will really like the new mount. I had the same one with the suction cup. It worked but this one is better.
Be Safe

Dan

 

On the new to me truck I did the uni filter mod. Changed both the engine and cabin filter. (The cabin looked like it had never been replaced.) Now about to use it to take my lady out for valentine's. Also the CV boot slide does work well. I did it on my last truck. I dont know if I'll be lifting this one but.... probably will. Haha Eibach 2.0 coilovers maybe

 

did you paint it???

 

It’s a piece that covers the emblem. Has double sided stickie tape.
Few different companies out there that make them. i found this one on eBay.

 

A lot of stuff today:
CMC courtesy of @allenfab
Pinch weld mod courtesy of my wimpy arms and @allenfab's hammer
285/75/16 Nitto Ridge Grapplers thanks to @Discount Tire

 

Installed my “cheap eBay bumper” today. Not too shabby.

Side point- thoughts on my raptor lights? I go from hating them to liking them on a day-to-day basis.

 

Damn she flexy!

(And this is before the rear shock relocate)

Wife wanted to get out of the house before the snow tomorrow, so we went out to the local OHV area.Let her drive for some of it. She’s so comfortable being the passenger, thought it would be good to let her feel the steep drop ins where you can’t see the road. And the off camber turns and some good medium sized steps. She did great. And had fun.

 

DD SS3 fogs mounted

 

Got my 5100s and AAL installed finally. Set at 1.75 with a 1/2" spacer driver's side and a 1/4" spacer on the passenger. 1.5 Wheelers AAL. Pretty leveled for now, hoping she doesn't settle too much in the rear and leave me with a bro-lean.

 

I absolutely love that front bumper, any information on it?

 

got a link on that shifter?

 

Just put on new shoes. Rocktrix RT111's. 17 inch with -12mm offset.

 

https://www.gogettagrip.com/

 

What are your thoughts on theses fog lights. I’m debating whether to go pro or max.

 

Just finished doing the accumulator delete. Gear shifting has improved significantly

 

I like them a lot although I got the sport. Wish I had gone pro.

 

This is going to sound dumb, but does anyone have the part number for the little trim tabs that go over the screws in the grab handles on the A pillar?

I lost one in the truck about two months ago and still can't seem to locate it, so I'm giving up (which means I will find it right after receiving the new part).

 

While it rained yesterday I trimmed the tailpipe away.... shout out to the guys at @Discount Tire for marking the correct spot to cut. I didn't notice that they marked it until I was home and checking out if the 305 65 R17 Mickey Thompson would fit up in the spare spot... "They do"..... just barely when mounted on @SCSPerformance 17x9 -38 F5s
Maybe someday i'll customize the bed like @scs_vuth did to gain back the under clearance...