Taco PRO Owners: Interested in a spring upgrade for front?

It also seems like Mark would be providing more updates if the springs were actually in production. He's on here a lot and hasn't said a word in quite a while now.

 

I think he just doesn't have anymore updates as of right now. I'm sure by summer we will all be riding high on our new springs

 

How many lbs is this spring rated will it increase the payload like 700lb springs with a lift? That would be awesome. I saw the original quote he put 4Runner PRO with Fox shocks but I assume he means the Taco Pro also?

 

What size tires can I fit with this upgrade?

 

Tons of information available outside of this thread on tire sizing. I'm running 285/75R16 on stock 2020 TRD suspension and that's about as wide as you'd want to go and they don't sell many tires with a larger aspect ratio over that size. YMMV.

 

Only rub when I fully compress the front at lock (plowing into a ridge/rock with momentum). Past that I haven’t even felt the need to use a heat gun for the wheel well.

No chop at all, still have enough clearance from the frame. I wouldn’t push it any further though.

 

Thanks, but I couldn't find the sarcasm font.

 

When We Can buy It ! Ready to pass the card

 

Is that similar to the laying it on super thick font?

 

Update:

Gang, I appreciate everyone's patience on this project.

Production Management has informed me that the current work flow puts availability for these out beyond second quarter. The part number for the 2020 TRD PRO is now in the system, but we're holding it for pre-order until we get closer to completion. I apologize for the delay in update, but I needed to make sure all of this info was concrete before I passed it along, as it is not what was originally conveyed.

 

Good to hear we have some more info! I know I am in no hurry. Still got plenty of miles left on the stock tires.... no need to lift if I dont need the new tires yet.

 

Is there an "unlike" button we can press instead of "like?" Kidding aside, thanks for the update Mark. At this rate I'll just go for a full mid travel suspension upgrade!

 

42 pages of being strung along.

 

I know that no one wants to hear that news, but understand this is a specialized product. Theyve been working through covid, and still trying to meet production on more mainstream stuff.

It sucks waiting as long as we're having to, but at the same time, they're still moving forward with it's development, and it takes a lot of time and money to do so. I think we need to look on the bright side of this, that there's still a product being made.

 

If you count only the posts that are made by eibach and not people asking the same questions over and over its only like 1 page.

 

All you have to do is hit the left and right arrows above Multi-Quote and Quote on all of Ryan and Mark's posts to skip over all the noise.

Ryan made 35 posts
Mark made 36 posts
71 posts, 20 posts per page=3.5 pages.

Yes...I am a little bored right now.

 

lol, you did the math.

 

So after a year on this forum, I just learned what those arrows do. See? This thread wasn't all for naught.

 

I think we are currently adding to the noise...but again, I am quite bored right now.

 

OP pls post the part # for the 2020 springs, not finding it on the eibach site.