Alabama thread!

Now that I bought these and they showed up at my house they would be a easy to make

 

SOS said if I wanted to make the trip they would load me even though they’re not open. so it sounds like I’m heading to South Carolina tomorrow

 

What compressor are you running in there? do you have an external holding tank?

 

Viair 444c without tank

 

There’s a Jacks at the bottom of the mountain. Jeannie and I will stop there around 8:30 to grab a biscuit.

 

OK now that I’m gonna have a winch bumper I’m going to be needing a winch. I’m thinking nothing less than a 10,000 pound and I haven’t decided on brand what is everybody else running for size and brand

 

I reading in the comments it sounds like you better grab more than one biscuits ha ha

 

Smittybilt X20 COMP 10k synthetic. Bumper is chassisunlimited

 

I like it. Do you prefer the synthetic over the braid or did it just come with that

 

And I moved to Alabama to get away from this shit.

 

I have a four wheeler with a winch and I’ve always had braid

 

I bought synthetic for higher breaking strength and weight reduction.

 

Nice-looking rig. Is that TRD inlaid in the rear fender looks cool

 

Good idea on the weight reduction. I am worried with this bumper. I’m gonna run into some issues with weight my wheels already grind into the truck fenderwells when I turn. going to need better suspension Springs really soon!

 

Yeah. It is pretty cool. My Tacoma is just two wheel drive so I broke the Tundra out yesterday morning.

 

Sorry if I’m talking to much just feel like I found a great group of folks here

 

What size tire do you have? your tires rubbing on the fender is a tire size / wheel issue, not a suspension issue. You will need to trim the fenders to get that taken care of, but it’s not a hard thing to do. Just keep cutting until it stops rubbing!

lower portion of the flare, pinch weld, maybe cab mount, etc.

 

265/70/17 I have set the sawzall on it a couple times.

 

I think part of my problem is I didn’t do enough research on the offset of the steel wheels and they ended up rubbing on my brake calipers so I had to buy wheel spacers and now the offset is causing a rub

 

Changing out LCA