What Have You Done To Your 3rd Gen Today?

Installed OME uca’s, progressive 3 leaf pack from Toytec, and a fresh alignment.

 

Try adjusting your air pressure first. When I got my skinnies they were at 40 psi, and had similar experience at high speeds. Got home lowered them to 35 and it was much better. I'm now down to 33 cold, which heats up to 35 driving. Seems to be the sweet spot for me. I'm still stock suspension and no other additional weight.

 

I honestly didn’t know which one was hangup and which one was answer. Don’t know why I had to do this and not Toyota. (Other vehicles have it)

 

I spy the Sunshine Skyway Bridge

Are you also at Fort De Soto?

 

I have 5100 with stock spring, it’s really stiff compare to stock.

 

But what setting are you on? I've read that using stock springs on some settings will make it stiff. The higher, the stiffer.

 

I have set at 2inch, it’s only stiff at turns. It’s not that bad.

 

Did you adjust the DD pros?

 

Question for those with the Teton Workshop shifters on the World of Tacomas:

Has anyone else experienced some issues with the ring under the knob getting loose and sliding down?




This is just a stock image obviously, but this is what I'm talking about. As a side note: I also have the Meso chrome delete ring over it. I've taken the Meso part off and loose with the factory part.

 

Gotcha. I almost went that route but got the Eibach pro sport lift plus headstong 3 leaf aal instead. Just need to find time to install.

 

I have the chrome delete ring as well and it comes unclipped from the Teton Workshop shifter all the time. It only falls about a half an inch but still noticeable, to me anyway

 

Man that's a great pic. Sweet ride too - Personally, I like subtle over "Call of Duty" mode.

 

I almost forgot. I picked up this very lightly used Snugtop Rebel about 3 weeks ago for a very good deal. I had to drive a bit for it but it was well worth it.
And as of now, after 14 months of ownership, I have officially paid the truck off in full!

 

Did the Muzzy ones work on a Tacoma. I painted mine because a different set I bought were too long.

 

Ok. Glad to know it's not just me. It's more of an annoyance than anything (see: OCD).

 

Did some flex testing and some leaf adjustments. Running the old CS version of the Dakars, and recently just got some Fox Resis w/Cd adjusters. Was running 4 leafs with 1 overload, and it rode like a lowered honda in the rear. Switched some leafs around today, and now just running 5 regular leafs and no overloads. Rides like a pillow without the stiff overload and everything is working perfect together now.
Flex photo is pre adjustment, was seeing where the bumpstop, shocks, and resi's were at clearence wise. Measured out to 26" under the tire with the forklift, not bad for some bolts ons and being used to 40"+ of flex in my old wheelers.
After photo, I think Im at like 1-1.5" of lift in the rear with some weight in the bed with 33s. And yes I'll get around to painting the leafs someday.

 

Those hoses have ATF in them, not coolant. What are you trying to do?

 

the problem I foresee with the little stickers is not everyone sees in colour... and that's why I used the touchscreen!

 

dig the LED lights in the bed! where did you snatch those up from? and the 3-panel switch? did it fit well after removing that little side pocket? cheers