What Have You Done To Your 3rd Gen Today?

These ones are very well worn in already, got them used from a guy that ran them for a couple years. I will just add another regular leaf or two in if they start w'ing, they should hold me off until I do sua.

 

i instill mine, with the right tool it won’t take long. Till I broke the bracket bolt. Fml.
Hand tie those bracket bolts, don’t even use electric impact drive.

I heard Eibach really good but little bit expensive.

 

OME 887 w/ Dakar leafs installed today. Now I need bigger tires...

 

When you say flush, are you asking about the bottom edge of the tailgate? Or the sides? It does sit flat across the entire tailgate. I love it, especially when it's holding an ice cold brewski for me.

 

Amazon. Was fairly cheap for the panel and 4 switches i bought

https://www.amazon.com/dp/B07T2FQN2...abc_6ANQC7ZCXEHBXSBHW8W2?_encoding=UTF8&psc=1

 

Tailgate lock, led interior lights and center console organizer... practical mods you’ll appreciate everyday.

 

The switches are all the same depth. I think the after market switch panel just makes the top ones sit proud of the rest. Happy to take some more photos if you want to see different angles.

 

We’ve got a cvt in a 2020 rav4 Xse. I don’t like it, when you put your foot down it feels like you’re slipping the clutch constantly. Toyota CVT doesn’t change gears (unless you put it over to ‘S’ flappy paddle mode) you don’t feel any change in revs at all from 0-80mph (sits at around 3,500rpm I’d guess when you put your foot down).

 

On my 2017 added the passenger side outer door lock/unlock sensor - OEM electric tailgate lock - wired the fog lights to operate with both the low and high beams on.

 

That is amazing. If I could get the middle one with an AC and rocks, I'd run this on my truck. Also, if I can get the AC truck graphic by itself, I'd love to use it on some other projects I have.

 

Thankful for the LB...

 

Got a brand new 2nd gen JL audio stealthbox for 60% off. Was able to ram it in the backseat by removing the plastic molding

 

Not today, but, wrapped the TSS and fogs.

$14 VViViD Air-Tint Extra-Wide Headlight Taillight Vinyl Tint Wrap 16" x 48" Roll Including Yellow Detailer Squeegee & 2X Black Felt Edge Decals (Matte Black)

https://www.amazon.com/gp/product/B01KGKIGAO/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

 

Added a Cab guard to my Diamondback cover.

 

Was wondering, wouldn't the previous year stealthboxes fit into the 3rd Gen's plastic molding without modification? It doesn't look like the overall dimensions of that plastic molding has changed drastically over the years.

2005-2011


2012-2015


2016+

 

The issue is with the air vent/dam. 2nd gen tacoma and 3rd gens plastic molding are place differently.

 

Yes, at the Ft.

 

Yep, same. I don’t know how to really fix it either. I thought about a real small dab of silicone but I ALWAYS seem to make a mess with silicone, glues etc. I’d rather just deal with the frustration than make it worse and have to deal with the mess I make.

 

Yes we are.