1st Gen Lunchtable Thread - General Discussion

Im not sure if I have a Kenwood or a pioneer already, I'll have to check..

How old is it to not have Bluetooth? My aftermarket single din radio is starting to crap out it's display but it has BT.. not that I ever use it

 

It does, holds up fine. The only reason the last one fell off was because the shop that did my LCA bushings knocked it off when they pulled them.

The up/down motion of the bump stop hitting the strike plate is fine with JBweld, but if you knock it from the side it'll come off pretty easy. It lasted on there almost 2 years before the shop knocked it off.

 

When I do the CV axle on that side I have to remove the bump because it gets in the way of taking out the axle, and a good smack with the hammer on the side of the base plate on the bump stop will break the JB weld

I should just drill a hole through the bottom of the LCA so I can attach a nut to the bolt that is supposed to hold the bump. Although IDK if that will compromise the integrity of the arm

 

Time to find someone with some car batteries, jumper cables, and 3/32nts 7018

 

Consider them yours.

Here just ask one of the guys to PM you my number; heading to my storage now.

 

Just install a rivnut .. that's what I plan on doing

 

Try to find the bumpstops from an 01 limited 4 runner

I know the ones on mine are soft rubber... Not rock hard like the ones on my 95 taco or 98 runner

Hitting them isn't jarring unlike the others

 

I need those in my life.

Woulda been better for the dorkel I think.

 

Figure I'll replace the ball joints on my SPCs while doing the bushings, one of the boots is torn anyway and they're almost 5 years old now.

Looks like Autozone has the best price on the pair, $121.00....Metaltech wants $150 "on sale" from $190, wtf

 

I think it's an age of rubber issue

 

Does rock auto have them? or is that the metal tech price?

 

I've given up on Rock Auto since most of the shit I've added to my cart on there ends up not being able to ship to CA due to the stupid cancer warning proposition that went into effect a few years ago.

 

I can order them to me and send them to you

 

Rock auto doesn't sell just the joints

 

Not seeing them on Rock Auto's website which is kind of weird

 

It's too stark of a difference to be that if you ask me, but you could be right

I could put a prybar on them and take a photo to show what I mean

 

https://www.instagram.com/reel/CLnwQOFjvD

 

Just order some JBA's and send me the SPC

 

Sure

 

Nope, the SPCs camber/caster adjustability is the only reason I can drive my truck straight right now.

Kind of hoping new bushings solves the problem but I doubt it