Too much lift?? Stock 2nd gen Measurement?

Hello, I just recently lifted my truck with fox 2.0s and I forgot to measure before my lift. I’m thinking I might’ve got 3 inches of lift instead of the intended 2 inch. Btw my Tacoma’s a 4cyl 2wd dcsb 2012 with 265/70/17 tires. If someone can inform me about stock hub to fender measurements that’d be great!
right now I’m at
driver 22 3/4
Passenger 23
Hub to fender measurements

 

Typical stock measurements are 20" front, 22" rear.

 

It's not uncommon to initially get more lift than expected but it will settle some over time. A 4cyl will receive a higher lift due to being lighter in weight.

 

Alright thanks

 

You can always reduce the preload on the springs by spinning the collar.

 

How much will it settle?

I wish I could on the truck, but fox 2.0s are aluminum and don’t want to mess the threads up :/

 

Thats the whole point of them being threaded.... Unload the weight off the truck, use spanner wrench n call it good.

 

Agreed

 

From your measurements being passenger and driver, is it safe to assume you didn't lift the rear and were trying to "level" it by lifting just the front?

 

Alright I’ll give it a try.

 

In a way. I’m putting in the tsb 4leaf pack which should give me around an inch of lift in rear

 

mhhh ide probably leave it cause it might settle some. Adjusting those is a task, i doubt your going to be able to with the spanner wrench. its a pretty garbage tool.

 

True that. There’s not even a spot to use a spammer wrench on 2.0s. They’re not designed to be adjusted on vehicle, but I’m just gone try to muscle it with some PB lol

 

Maybe clean the threads first before using a said wrench but yea that’s why they are there

 

OP, don't be shy, post some pics and introduce us to the truck in question.

 

Here she is

 

Pt 2

 

Get a new leaf pack. Problem solved!

 

So what's the issue? Looks fine to me. If you want a rake then adjust the front CO's. Drive it a few months then re-measure to see if it settles to your liking.

 

You gone buy me that? Lol