1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Replacement of Radiator, Thermostat, Water Pump, VVTi Filters, (but not) Valve Cover Gasket Who makes these d-ring shackles??? Brake pads and rotters part # check Advice on these two lift kits. Trying to identy what part is missing to replace Has anyone mounted one of these in place of their cigarette lighter?

Motive Pressure Bleeder vs Speed Bleeders

Discussion in '2nd Gen. Tacomas (2005-2015)' started by mikalcarbine, Oct 22, 2019.

  1. Oct 22, 2019 at 12:08 PM
    #1
    mikalcarbine

    #1
    mikalcarbine [OP] Well-Known Member

    Joined:
    May 5, 2017
    Member:
    #218236
    Messages:
    504
    Gender:
    Male
    First Name:
    Mike
    Phoenix, AZ
    Vehicle:
    2015 AC TRD OR
    About to flush my system but I'm kind of torn with which direction to go. I maintain 3 vehicles so getting the Motive bleeder seems to make more sense for me and I'm really looking for a 1 man bleeder setup. Can anyone confirm that this will work with the TRD OR master cylinder? I've read the universal adapter is needed but how does one successfully "chain" the adapter around the big MC?
     
    mikalcarbine, Oct 22, 2019
    #1
  2. Oct 22, 2019 at 12:16 PM
    #2
    GorgeRunner

    #2
    GorgeRunner Out There

    Joined:
    Sep 16, 2019
    Member:
    #305428
    Messages:
    861
    Gender:
    Male
    Vehicle:
    2005 PreRunner
    Speed bleeders work well. Basic.
     
    GorgeRunner, Oct 22, 2019
    #2
    Norton likes this.
  3. Oct 23, 2019 at 9:49 AM
    #3
    mikalcarbine

    #3
    mikalcarbine [OP] Well-Known Member

    Joined:
    May 5, 2017
    Member:
    #218236
    Messages:
    504
    Gender:
    Male
    First Name:
    Mike
    Phoenix, AZ
    Vehicle:
    2015 AC TRD OR
    Anyone who owns a motive bleeder have any feedback?
     
    mikalcarbine, Oct 23, 2019
    #3
  4. Oct 23, 2019 at 9:56 AM
    #4
    TheDevilYouLove

    #4
    TheDevilYouLove You can’t polish a turd, but you can polish a TRD

    Joined:
    May 26, 2016
    Member:
    #187953
    Messages:
    2,897
    Gender:
    Male
    First Name:
    Steve
    Marylandistan
    Vehicle:
    2010 Tacoma TRD Sport Access cab 4x4 silver streak
    I have one but I have TRd sport brakes. I love it!
     
    TheDevilYouLove, Oct 23, 2019
    #4
  5. Oct 23, 2019 at 10:00 AM
    #5
    69L46Vert

    #5
    69L46Vert Well-Known Member

    Joined:
    Aug 7, 2019
    Member:
    #301519
    Messages:
    87
    Gender:
    Male
    First Name:
    Rick
    Maine
    Vehicle:
    2007 Regular Cab 4x4
    I don't have one yet but plan to buy it soon. I have read the chains work poorly and people prefer to use a large c clamp instead of the chains
     
    69L46Vert, Oct 23, 2019
    #5
  6. Oct 23, 2019 at 10:20 AM
    #6
    nd4spdbh

    #6
    nd4spdbh Well-Known Member

    Joined:
    Oct 7, 2013
    Member:
    #114055
    Messages:
    14,626
    Gender:
    Male
    SoCal
    Vehicle:
    13 DCSB TRD OR v6 Auto
    OP. are you an 09+ TRD OR 4x4 (that is do you have an electric boosted master cylinder?)

    If so, dont bother with any sort of speed bleeders, you have an electric pump that will continuously pump brake fluid for you. Simply get a piece of wood/pipe/prosthetic leg to stick between the driver seat and the brake pedal, slide the seat forward to depress the brake pedal a decent amount. Turn the truck to ON (engine does not need to be running), then go to whatever wheel you are trying to bleed and crack the bleeder and watch the brake fluid spew out.... just make sure to watch the reservoir level!
     
    nd4spdbh, Oct 23, 2019
    #6
    Torspd, TacoFergie, 69L46Vert and 3 others like this.
  7. Oct 23, 2019 at 11:07 AM
    #7
    Rob MacRuger

    #7
    Rob MacRuger Well-Known Member

    Joined:
    Apr 22, 2017
    Member:
    #216950
    Messages:
    412
    Gender:
    Male
    Vehicle:
    2006 4X4 SR5 4.0
    Amazon has the Toyota reservoir cap for the Motive product. It's $50 but worth it.
     
    Rob MacRuger, Oct 23, 2019
    #7
    69L46Vert[QUOTED] likes this.
  8. Oct 23, 2019 at 11:26 AM
    #8
    TheDevilYouLove

    #8
    TheDevilYouLove You can’t polish a turd, but you can polish a TRD

    Joined:
    May 26, 2016
    Member:
    #187953
    Messages:
    2,897
    Gender:
    Male
    First Name:
    Steve
    Marylandistan
    Vehicle:
    2010 Tacoma TRD Sport Access cab 4x4 silver streak
    TheDevilYouLove, Oct 23, 2019
    #8
    Rob MacRuger[QUOTED] likes this.
  9. Oct 23, 2019 at 12:29 PM
    #9
    Lester Lugnut

    #9
    Lester Lugnut Well-Known Member

    Joined:
    Mar 3, 2010
    Member:
    #32477
    Messages:
    2,822
    Gender:
    Male
    N of Mex-S of Canada-E of LA-W of NC
    Vehicle:
    '15 Tacoma PreRunner V6 SR5 Auto
    Does this method auto-bleed both front brakes as well? All 5th Gen 4Runners use this same system and the doc in the 2010 4R FSM suggests the auto-bleed is for the rear brakes.
     
    Last edited: Oct 23, 2019
    Lester Lugnut, Oct 23, 2019
    #9
    mikalcarbine[OP] likes this.
  10. Oct 23, 2019 at 12:58 PM
    #10
    nd4spdbh

    #10
    nd4spdbh Well-Known Member

    Joined:
    Oct 7, 2013
    Member:
    #114055
    Messages:
    14,626
    Gender:
    Male
    SoCal
    Vehicle:
    13 DCSB TRD OR v6 Auto

    all 4 corners!
     
    nd4spdbh, Oct 23, 2019
    #10
  11. Oct 23, 2019 at 1:04 PM
    #11
    spencermarkd

    #11
    spencermarkd Well-Known Member

    Joined:
    May 15, 2016
    Member:
    #187025
    Messages:
    4,023
    Gender:
    Male
    First Name:
    Spencer
    Vehicle:
    07 Driftwood Pearl 4Runner
    spencermarkd, Oct 23, 2019
    #11
    Rob MacRuger and Lester Lugnut like this.
  12. Oct 23, 2019 at 1:10 PM
    #12
    nd4spdbh

    #12
    nd4spdbh Well-Known Member

    Joined:
    Oct 7, 2013
    Member:
    #114055
    Messages:
    14,626
    Gender:
    Male
    SoCal
    Vehicle:
    13 DCSB TRD OR v6 Auto

    I think the biggest issue i see with any of the "speed bleeders" that replace the nipples or use the nipple itself is that air gets pulled in via the threads of the bleeder as those are not meant to seal air. Teflon tape helps but gets chewed up quick via brake fluid.

    But 13 bucks is WAY better than other options.
     
    nd4spdbh, Oct 23, 2019
    #12
    Rob MacRuger likes this.
  13. Oct 23, 2019 at 3:27 PM
    #13
    Lester Lugnut

    #13
    Lester Lugnut Well-Known Member

    Joined:
    Mar 3, 2010
    Member:
    #32477
    Messages:
    2,822
    Gender:
    Male
    N of Mex-S of Canada-E of LA-W of NC
    Vehicle:
    '15 Tacoma PreRunner V6 SR5 Auto

    Thanks - good idea. For those who want to see it in use - see YT video below - man doing brake work - but bleeder tool usage starts at about 17:17

    https://www.youtube.com/watch?v=A20REqK4gsI
     
    Lester Lugnut, Oct 23, 2019
    #13
  14. Oct 23, 2019 at 4:45 PM
    #14
    Chris(NJ)

    #14
    Chris(NJ) Well-Known Member

    Joined:
    Jan 21, 2010
    Member:
    #29777
    Messages:
    5,052
    Gender:
    Male
    First Name:
    Chris
    Usually in Central Jersey
    Vehicle:
    08 Indigo 4x4 DC OR
    Mods are currently being changed .....
    Never knew that was a thing
     
    Chris(NJ), Oct 23, 2019
    #14
    nd4spdbh[QUOTED] likes this.
  15. Mar 3, 2021 at 12:17 PM
    #15
    JasonLee

    #15
    JasonLee Hello? I'm a truck.

    Joined:
    May 9, 2014
    Member:
    #129454
    Messages:
    12,366
    First Name:
    Jason
    Q322+3C Denver, Colorado
    Vehicle:
    15 TRD OffRoad
    TRD Supercharger and more.
    :mind-explode:

    I'm glad I found this - I was about to buy some speed bleeders for my truck. I just need to have someone continuously feed brake fluid into the reservoir while I'm at each wheel.

    The 2nd gen doesn't have a load proportioning valve at the rear axle or anything, correct? On my 1st gen, there were 5 bleeders (1 on each wheel and 1 on the load proportioning valve above the driver side of the rear axle on the frame.
     
    JasonLee, Mar 3, 2021
    #15
  16. Mar 3, 2021 at 1:17 PM
    #16
    nd4spdbh

    #16
    nd4spdbh Well-Known Member

    Joined:
    Oct 7, 2013
    Member:
    #114055
    Messages:
    14,626
    Gender:
    Male
    SoCal
    Vehicle:
    13 DCSB TRD OR v6 Auto

    Correct. no porportioning valve on the second gen.

    FYI the electric pump will help you with the rears, the fronts you still need to do it the manual way. I like to hold the pedal down with a stick wedged between the seat and pedal. Then use some channel locks to squish the pistons back into the caliper to push lots of fluid out the bleeder (making sure to close the bleeder before releasing) then you can pump the pedal slowly a few times to get fresh fluid back into the pistons.
     
    nd4spdbh, Mar 3, 2021
    #16
  17. Mar 3, 2021 at 1:40 PM
    #17
    JasonLee

    #17
    JasonLee Hello? I'm a truck.

    Joined:
    May 9, 2014
    Member:
    #129454
    Messages:
    12,366
    First Name:
    Jason
    Q322+3C Denver, Colorado
    Vehicle:
    15 TRD OffRoad
    TRD Supercharger and more.
    It’s going to be fun with the StopTech 6-piston calipers with two bleeders on each caliper...
     
    JasonLee, Mar 3, 2021
    #17
  18. Mar 3, 2021 at 1:42 PM
    #18
    Hans Moleman

    #18
    Hans Moleman Well-Known Member

    Joined:
    Jan 30, 2008
    Member:
    #4505
    Messages:
    1,006
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    2023 F-150 Powerboost
    Hans Moleman, Mar 3, 2021
    #18
  19. Mar 15, 2021 at 5:53 PM
    #19
    Crow Horse

    #19
    Crow Horse Well-Known Member

    Joined:
    Jul 9, 2016
    Member:
    #191597
    Messages:
    1,119
    Gender:
    Male
    Central NY
    Vehicle:
    2012 DCSB TRDOR
    How did you connect the BA10 with the Motive unit? Did you use the QD?
     
    Crow Horse, Mar 15, 2021
    #19
  20. Mar 15, 2021 at 6:48 PM
    #20
    Waasheem

    #20
    Waasheem The catholic radio bear

    Joined:
    Jun 26, 2019
    Member:
    #297494
    Messages:
    2,844
    Gender:
    Male
    First Name:
    Waasheem
    Vehicle:
    2007 xrunner
    I bought this a couple years ago. It worked good for a little while. Around the 5th use it stopped working.
     
    Waasheem, Mar 15, 2021
    #20

Products Discussed in

Power Probe BA10 Small Adapter for Toyota
$66.73
Motion Pro 08-0143 Hydraulic Brake Bleeder
$17.55
To Top