What Have You Done To Your 3rd Gen Today?

Does the tacomas pearl have the same rainbow pearl when the sun hits it like the blizzard?

 

I used a dent puller suction cup from the auto store to remove my mirror glass if that's what you're asking about although you might be able to just pull them off carefully.

 

Yes push top part of mirror then pull out from the bottom. You can see it in action at YouTube. Be careful with the wires/plugs if you have heat mirror feature and/or BSM

 

This afternoon, I took off the oem mud flaps then took a drive with the windows down for the first time since I bought it in December. I even found this rusty old tube to take a picture with!

 

Asked about this. No Response. Price just dropped. So I went for it.

$140 Hooke Road Tacoma Flat Tailgate Cover Panel Table Plate Pad for 2005-2023 Toyota Tacoma 2nd 3rd Gen, Tail Gate Camping Cutting Board - Black

https://www.amazon.com/dp/B08FR2XFVJ/ref=cm_sw_r_cp_apa_fabc_FZC8V0EP2HQ8Z8KM5R2H?_encoding=UTF8
Now 111 Dollars

 

The colors are VERY similar. We’re both working from home tomorrow. I’ll try to get some comparisons out in the sunlight.

 

This is what I used. Also, I suggest removing the top cover so you can spray a bit of WD-40 on the clips that hold the mirror in place.

 

I have mountain hatch on mine. Not bad on yours.

 

Price drop on Amazon
111 dollars

 

I saw that.. I already got mine from Mountain Hatch about a year ago.

 

How do you like the mountain hatch? I heard there have been some fitment issues with the third gens.

 

Fine. No issues so far.

 

Used this video for instruction reference.

https://youtu.be/z8zly8r7ppk

 

Curious how well the defrosters work. I love mine, but it does leave quite a bit of space around the blind spot indicator

 

Did those bed stiffeners require any drilling? or did it use factory holes?

 

Drilling yeah-- but easy

 

@Bdbakel @Tacosrus


Here is my picture: https://www.tacomaworld.com/threads...-3rd-gen-today.399305/page-8016#post-23402262

 

Looks clean. I'm between the Mountain Hatch and the Trailgate from AL Offroad. Kinda leaning towards the Trailgate since its cheaper and had straight up cup holders in it although the mountain hatch probably wouldn't get as hot in the summer since its plastic instead of metal.

 

Installed a set of Suma Performance sideview mirror turn signals: https://youtu.be/6bPooPn6K6A

I think that it pairs up quite well with the existing smoked sequential turn signal set!

 

Sure pal.