What Have You Done To Your 2nd Gen Tacoma Today?

Thought it was something I could possibly do in my drive way lol. I'll have to check around and see if any shops around me do it. If not over the counter stuff will have to do for the time being.

 

Or you could just unplug the two plugs under the driver's seat, one plug for the seat belt chime and the other plug for the weight sensor. The truck will think someone is always sitting in the driver's seat with the seat belt on. As long as the truck doesn't drive itself the air bag and all other features will function normally. But it will suck if the truck drives itself and gets into a crash because you'll need to replace the air bags that went off with no people in it...

 

Do you have a link for the center console and change tray?

 

Whenever you have a chance, do you think you could snap a picture of the rear of the front fenders? I’m thinking I’ll have to trim the bushwackers to fit without rubbing, my setup is pretty wide. Had to trim quite a bit off the fender flare and even a bit of metal.

 

Looks great man. Your set up is very similar to mine. I have a set of the same clamps waiting to get installed- waiting the for it get a bit warmer. How was the install? Did you have to trim your battery leads? Thanks!!

 

I chose to clip off the negative, add the pressure fitting and replace the body strap, yep. The positive I just bolted in place. You don't HAVE to clip the negative, they include a spacer for the top of the clamp so you can just put the original on it like a battery post.

 

Sure. Here are the Amazon links.

$20 Vehicle OCD - Center Console Organizer for Toyota Tacoma (2005-2015) - Made in USA - SLX100

https://www.amazon.com/gp/product/B00A5UEOLG/ref=ppx_od_dt_b_asin_title_s01?ie=UTF8

$17 Vehicle OCD - Center Console Organizer Tray for Toyota Tacoma (2005-2015) and (2016-2023) - Made in USA - SLX133

https://www.amazon.com/Vehicle-OCD-...HH44MNPG989B6TE8A&refRID=WYJHH44MNPG989B6TE8A

 

Just enjoying ownership!
Happy Friday

 

There is a way to do it in your drive way with over counter stuff.....I watched videos.......for less than 1 hour Labor plus the chemicals, I thought it was worth the price, plus no mess, no trouble shooting.....

 

Here's an added pic with the flares reinstalled. I trimmed the fenders about 1" more than I did the flares. Just gotta get new fender liners in it now.

 

Switched out my OME 884's for 885's today. The truck sits perfect now, and I still have about 3/4" - 1" rake which I like. I also noticed the 885's appear to handle nose-dive better than the 884's did. Maybe it's a placebo effect. I had the oil changed and the transmission drain and filled today as well. I'm planning on clay-barring the truck tomorrow and was going to wait to take a picture until then but here's one anyhow. I'm going to try to get it aligned next week to correct some camber and caster, but overall the handling is still good.

 

this looks like the one I have/that I got from Amazon. Serves it purpose well!, and was very affordable!

 

Finished up the platform today. I added L track, secured with 10-24 hardware and fender washers. Created some brackets that tie into the seat bolts and bolt to the platform with 3/8” stainless steel hardware. Overall I’m incredibly happy with how it came out. It’s rock solid.

 

Got my 12volt solutions remote start installed. Should have done this sooner!

 

Just finished new wheels, rear shocks, front struts, front rotors and pads, upgraded shift knob, AJT A/C control knobs, new wireless phone charger, swapped out my old TSS side decals with some TRD stuff. Earlier mods are billet grille, LED headlights, LED fog lights, aftermarket headlight assemblies, aftermarket fog light assemblies, K&N air filter system, roof rack, tool box.

 

Done with my fender trim and finally washed after hitting up ocotillo a few weeks ago

 

Cool, thanks the the reply! I've been circling around this mod for a while...for some reason messing with the battery leads scares me a bit.

 

AllPro front bumper shipped, winch showed up. Pinch weld smash, Alcan leafs and fender trimming. Cab mount will be chopped Monday.

 

Also added some Hondo knobs. Love the feel and look.