What Have You Done To Your 3rd Gen Today?

That's actually the exact reason I decided to go a different route. My charging port is kind of jacked up so I need to be able to charge wirelessly and I figured the plate would interfere. Glad to know I was correct. Thanks for the input sir.

 

Has anyone seen an ETA on this?

 

This is what you’ll need along with the lock n’ lube grease coupler. From what I recall there was one zerk point that I was able to attach the coupler and grease but needed this for the other point. Worked like a charm.

https://locknlube.com/collections/greasing-accessories/products/narrow-needle-nose-dispenser

 

Welcome. Now hide you credit card!!

 

Let’s see the old fairing in a pic haha

 

I'm thinking of going this route. Just not your preference or are there issues with this style?

 

Bed extender:

 

OMG- first hand wash since November, . I was happy to see that it’s still Super White.

 

I’m hopefully going to finish what I started last night. Cant believe I just cut a big a** hole in my frame.

 

Broke a line lol guess I mounted it too close

 

Took it for a ride since I had the day off

 

I like this Gonna have to look this up...

 

Na, you have to notch a little area out of the shock tower for the hose. The shock will just turn as you drive it. You can also cut a small length of hose and zip tie it around the hose where it could contact and it will take a bit for it to rub through.

 

I have a 6" zone performance DB lift. In the rear is a set of blocks to level things out, will be adding a AAL system at some point, but the adjustable shocks feel totally different than the Zone shocks that were on it.

 

Mounted my Sukie Tech no drill hood struts and hard wired my battery tender leads.

 

Do you use this with the tent on the bed... if so I’d like to see your set up... love that propane heater..

 

How difficult was it? It looks great

 

Thanks green

 

Awesome. I was wondering if I needed something like that. I am assuming you just apply pressure to the center of the fitting and it will inject the grease.

 

would like to see this with an led logo or brake light connected