Colorado Trading Post

I've been saying the same for months! Someone wants a new bed cap, c'mon guys...

 

SOLD

UPDATED: I did find a leak in one rear shock. So it will need to be rebuilt. I will check into a rebuild price for those interested and will also adjust my asking price accordingly. Also, I updated the ~ price on the uniballs to $160 as I missed the 1 when I typed it out this AM.

I will not have them all off and cleaned up until Monday so I will get pics updated as I can.

Considering the updated status, let me know if you are still interested. My preference would be to make someone happy and sell it as a full setup. . However, if everyone that wants a part is able to meet up (pall all at once) and enjoy some beers and story swapping I'd be up for selling them separately.

====================
I will be posting my Icon Stage 3 setup this weekend (needs new Uniballs ~ $160 or if you want to spring for the deltas a set is about $250)

I wanted to give you all first shot. They have a little less than 30k miles on them, and just need the uniballs replaced. This setup will fit 05-15 Tacoma according to the Icon website.

I was thinking $1550, but I don’t know what the used market is on them. PM me if you are interested. The photo below is what I have minus the delta joint. I’ll have actual photos once I get them off the truck.



With the setup I will also include the following (at the price listed [minus rebuild cost])
Icon Tubular UCA Cover Cap Kit: https://sdhqoffroad.com/products/icon-tubular-upper-control-arm-cover-cap-kit
Coil Wraps (the ones for the setup I have) : https://www.iconvehicledynamics.com...ssories-icon-raptor-30-coil-wrap-w-logo-pair/
1” cast Block kit: https://www.iconvehicledynamics.com/accessory/11003/icon-accessories-1-cast-block-kit/
We are remodeling our home so its a bit full of housing stuff other than my truck and parts.
So...
(If I can find it) I also have a sway bar relocate kit I will include https://www.iconvehicledynamics.com...-05-up-taco--07-09-fj-swaybar-relocation-kit/
(If I can find it) I also have a spanner wrench I will include: https://sdhqoffroad.com/products/ic...n-coilover-shocks?_pos=3&_sid=c1a133d51&_ss=r
(If I can find them) I also have a set of new ubolts that should work with the AAL and stock springs.

 

If u want to separate I’ll take the uca’s

 

My 2007 NorthStar MC600 Slide In Pop Up Camper is for sale. It is listed high on CL and I am open to offers. See link below for details.

https://denver.craigslist.org/rvs/d/arvada-2007-northstar-mc600-slide-in/7289236827.html

 

Anyone interested in a K&N air filter for 2nd gens? It is starting to dry rot a bit. Thought I'd check before I trash it. Also have the cleaner/oil to go with.

Free

 

EDIT: After playing on ICONS site, this will work for 2016+

If I read the screenshot right, this will work for 2016+ too just at a lower lift. Is that correct?

 

"Just because its cheap, does NOT mean you have to buy it!"

"Just because its cheap, does NOT mean you have to buy it!"

"Just because its cheap, does NOT mean you have to buy it!"

 

I'm interested in the front coilovers and the rear shocks only. No leafs. No UCAs.

We just need someone that wants the Stage 3 add-a-leafs.

 

Whoever buys my camper will need those!

 

I’d be interested in the AAL

 

So I shot you a PM but i see there is some interest above also.

 

NOT MINE.

Wasn't someone looking for a Decked?

$800: 2nd/3rd gen Tacoma long bed system comes with 2 Large and 2 small draw dividers.

 

Pm’d

 

I don't see one. Did it send?

 

Oooo if this is still available after I repaint and sell my slide in I’m interested. I’ll shoot you a message

 

Nope. I saw it first

 

Let’s settle this in the street. I’ll put it in my truck, and you can stand in the street and watch me drive away

 

I'll be there with my trailer for when your truck breaks down

 

Still trying to sell my 96 5-Speed 4runner. Dropping the price to $6500, located in Steamboat.

https://www.tacomaworld.com/threads/96-4runner-5spd-new-clutch-6500-obo-colorado.707551/