Everything MOLLE BS

I successfully installed mine in my 2010 Tacoma single cab! Wish I could post a picture..
Fits Great!!!

 

Please take pics when you can. Did you have to modify it at all?

 

I have pictures just can’t upload them. PM me and I’ll email them to you.

 

The only modifications I had to do were remove the factory jack mount and drill four holes into the Molly panel. I cut the ends off the stock plastic thing to make it look more finished. Shown in the third from last picture.

 

GB23 Washington state.

Pre-install impressions: looks great; I'm excited. The MOLLE pattern is not the same as the pattern on some of the bedside panels from other companies. Without measuring, this MOLLE pattern looks much more true-to-spec than the bedside panels, which I also own.

I got a matte black leatherette powdercoat to match the texture of the dash, steering wheel, and center console. I like that the leatherette will conceal chips better upon touchup. It's a little shiny though, so I might knock it down with a flat clearcoat.

I think the Black Jack powdercoat that someone else posted would match the plastic on the door pulls and other interior controls, and I'd consider doing that next time.

 

I still have to install, but I just wanted to see how it would look. Thanks Docloco, well worth the wait.

 

Came home to a pleasant surprise today. Thank you Docloco, powder coat looks great!

 

berunaz, here, and I am definitely interersted.

 

@TacomaJ45
It looks like you have an access cab. I’m having trouble finding the mounting points because I sound deadened the back panel prior to ordering this and I’m wondering what mounting points you’re using.

 

@Smokes
I haven’t had a chance to install it, but I will be doing it this Saturday.

Let me know what mounting points you used if you already did it.

 

I temporarily installed it. I don’t know exactly where the mounting holes are because of the sound deadening. Let me know how you make out and send pics if you can.

 

So, ah, what's up with this? 2014 Access cab

 

The first prototype of an access cab didn’t have those mounts at all. That’s what’s up with that.

 

Has the eagle landed for anyone on the east coast?

 

I actually have the same issue. I’ve pulled the holder and tried to push it over the bolt on the right and found myself to have too short of a bolt as well.

 

Yup, Boston MA, got mine on Monday

 

Yeah I ended up cutting mine off since I won’t be reinstalling the jump seats.

 

Anyone mounting am AR? If so what clamp/mount are you using?

Just finished painting mine.
Sound Proofing material isnt arriving till the monday. Will post when finished.

 

Panel came in and I love it :3 ... sorry for responding late but I had to get everything in before the rains hit this week.

The image quality isn't the best because my phone is old school. I plan on rebuilding my platform to account for hanging some of the solar system on the panel like the charge controller and maybe the inverter. Working on stabilizing it a bit more for the weight of the controller (the 2nd row of screws weren't in when i took this and i was fleshing out the insulation in the backend).

 

I've seen quickfist being used a lot for molle. I can't do it...california

https://greymantactical.com/products/quickfistoriginalclamp-buffertube