The SKINNY on skinny tires

I’m a big fan of stock ride height and low center of gravity. Plus I’m short. Lol.

 

I wanted to see your response. I dig it lol

 

Anybody run 255/75R17 on stock suspension and stock sport wheels? Originally I was gonna go with a wheel with a better offset, but I don’t have the cash for a zero offset right now....

 

@Chris202OR finally got it done!

 

Taking off the 265/70/17's tomorrow and putting on some Michelin Defender LTX in 255/75/17..... I'll post a pic.

 

Took off my 265/75/17 Wildpeaks and put the Michelin Defender LTX on in 255/75/17. Smooth as silk and quiet.

Fits well and I think it looks good

 

Nice, is your truck lifted?

 

What is the wheel width and offset. The tires look good. That may be a route to adding taller tires to my -12 offset wheels.

 

Before and after.

Finally ditched the stock size tires and went with 255/75r17, Discoverer AT3 4S.

 

Been running the same for the past two years. You’ll be happy .

 

Yes, I have OME 885's in the front and Dakar leaf springs in the back. The Bilstein 5100's in the front are on the lowest setting. So, not much more than a leveling up front and about 2 inches in the rear.

 

Have about 1000 miles on the same, and so far, they have been all good.

 

Is it lifted?

 

Glad to hear both of those responses! Spent the last two months or so researching and saving up. Main attractions were weight of the tires (only 37lbs!), wet traction rating, and of course being skinnies.

 

Nope! Stock as far as I know. Suspension looks OEM Sport, and I don’t see spacers anywhere. Bought it about a year ago, and everything seems stock. Mud flaps were trimmed off when I bought it though, so I assume the previous owner ran larger tires at some point.

 

16x8 -12 offset, tires Mastercraft cxt 255/85/r16 not too noisy I like the tires so far. The only thing I wish was made for this size is a load C but only got a load e option is an a bit heavier side definitely taking an MPG hit even tho I drive like a grandma

 

So are you lifted or is it stock? It really has a good stance.

 

lifted the front a little over 2 inches with Dobinson IMS and springs and SPC UCA. Have not lifted the rear because the shocks are on backorder so the front is lifted slightly higher than the rear

 

You guys and your lifted truck....you are going to get me in trouble. Lol

 

I am on yokohama geolander mt g003's in a 285/75/17 roughly a 33x10.5. I am super happy with this set up.