1st Gen Lunchtable Thread - General Discussion

Correct. No issues. Genuine manufacturer date/lot code. I'm running them in my 3.4L there is another member running them in their 4-cyl.

Check the price using the RockAuto discount code. They are not the cheapest things in the world.



Reboxed from Japan.

 

I thought Hubie Halloween was pretty good. Kinda along the lines of Billy Madison.

 

oil

 

right? if a bird poops on my car it gets washed off immediately

 

https://www.tacomaworld.com/threads...st-gen-edition.138573/page-9952#post-23618428

I probably have more pics somewhere.

 

I haven't seen that one, I'll have to check it out.

 

It's on Netflix

 

Yea that's the biggest reason I've held off so long, they're 76 a piece from rockauto

But the wife rode in my truck the other day and complained about the unburnt fuel smell so I figured it was finally time to replace the clogged cat and injectors... I don't have any runability issues but I've been avg 11 mpg this winter and the unburnt fuel smell makes me believe the injectors are to blame

 

that looks like a much simpler one to try and fit

 

Have you seen the YouTube channel project Farm? That guy used bacon grease in a lawnmower engine and it didn't fail.




As far as he showed in the video anyway

 

could be an exhaust leak or o2 sensor issue telling the truck to add more fuel than it needs to.

I noticed my LTFT was -11 this AM so I think I need to go deal with my exhaust leak

 

Jesus lol. I bet it stays cool though, even when you're crawling.

 

https://www.youtube.com/watch?v=umkixNb1Q1k

 

you would think, I still burned up a reman pump with that boi on there last time I was in moab

 

@Abeyancer

 

I have a new exhaust manifold and new gaskets on the y collector. New O2 sensors front and rear. THe voltage graph shows signs of it being the cat causing my P0420 so im finally going to replace that with the complete cat back exhaust I got off a 2nd gen tacoma


When I rebuilt the engine and reinstalled the old injectors 3 had a resistance of about 16ohms but one had a resistance of 256

I installed it anyway cause I needed the truck running and it operated better than the knock off pink injectors I bought, so I didn't question it. After the missus got cranky over not being able to afford to lose braincells like I apparently can, I figured it's time to tackle the issue

 

Dang. I wonder if its picking up heat from the radiator. Was the fan running like it should?

 

Wow, that is close! Did you weld on those front bracket pieces to bolt the cooler to?