What have you done to your Tacoma today? 1st Gen Edition

excluding aftermarket seats/brackets for $$$$

 

dang.. you ain't kiddin' about mall crawlin'.. looks good

 

daaaayyum!, what's up with those half-doors? they look cool!

 

This worked perfectly thanks!!!

 

With some slight modification (no welding) 4 runner seats can bolt in. The inside 4 runner brackets are a direct bolt in. I drilled the outside tacoma bracket off of my buckets and bolted them onto the 4runner seat rails. Huge improvement over the tacoma bucket seats.

 

Wasn’t really me (stuck in Saudi for another 2 weeks) but I got word that my Gear kit from Nitro finally shipped to my garage. So they’re tearing into this thing and should be good for my arrival. OME with 883’s, 285/75/16 Yokohama m/T’s on some KMC wheels. Wheelers brake lines, plus some other odds n ends to pass an inspection. Going to be an expensive bill, but I’m equally excited to come home to drive the taco as I am to see the family

 

I just grounded to the seat anchor bolts and tapped in to one of the fuses in the interior fuse panel with a fuse tapper

 

My BMW seats were free (found on FB Market)


I just used the brackets I removed from the factory seats.

 

I almost opted for some newish Audi leather seats but I didn't want to mess with the center mount rail they use.

 

E90/92/93 sport seats, same ones I have just with less swaggy color. Did you take the subwoofers with em?

 

Those look nice!

 

Mine are 128i seats. No subwoofers.

 

I went a different direct on the subs

 

Got my new grille on.

 

You grind/cut the front lip off that rci skid to get it to mount to your trail gear crossbember? I have a RCI skid set and TG bumper and haven't installed yet due to that reason, want to see if that is in fact what people have to do

 

I did have to cut that lip off, it took less than a minute with a cutting disk and you wouldn't ever know unless you do.

 

I can post a close up if you'd like. I was pretty bummed about it at first, but after cutting it and getting everything installed it was a non issue.

I do see that you have a 2002 amd that does mount slightly different so your results may vary from mine.
RCI also made these for third gen 4runners before marketing them to us first gen tacomas, so fitment issues are to be expected.

 

my dumb ass washed my truck yesterday, just in time for it to dump rain the entire day today.

 

I only let mother nature wash my Tacoma.

 

I used to do that, after I got my BRZ I started taking care of the paint on all my stuff a lot better.