What Have You Done To Your 3rd Gen Today?

Alright, I know it’s been a while, but it’s time for a couple touch ups, paint, lights, winch, etc...this is the rough mock up. Pretty happy with it.

 

Got my new strobe button and momentary switch to change strobe modes. I lost 1 button that in the future I dont plan to use anyways (yellow light bar)

 

Just installed @jrich44 's amber L.E.D lights on my 21 SR. Went with the 4 light combo- super easy and looks really good.

 

So how did you do it ?
Inquiring minds want to know

 

Washed off hopefully the last of the Oak Pollen. Need to get a coat of wax on it.

 

A lot of people would but they’re so damned expensive. Like $250 from the dealership and like $200 on eBay. I found a guy on here that let me have his for $80. Still “pricy” in a sense, but it’s worth the $80 to me so I’m glad the guy was able to let it go for that (if you read this thanks again!!!). I already had everything else I needed for it to install it (bolts, rivnuts, etc).

 

Installed Desert Does It seat jacker on the passenger side so hopefully my pizzas don’t slide off the seat anymore.

 

Sliders

 

Installed a 9Drive throttle amplifier and a set of spotter mirrors.

 

Purchased directly from RC. It’s the same cover that Gator EFX Hard Fold... why do I know....? Because the one I ordered has the Gator label on it! Hahaha!

 

It’s an emblem overlay. I got it from here.

 

I was thinking the same thing for like a week. One day it was pissing me off so bad I just ordered one. After the install, I was like damn should have done this sooner.

 

TRD Skid Plate

 

Threw this on for camping/the beach this Summer.

 

How much did that run you?

 

I made and installed some TRD stripes from some vinyl out of my wife's scrap bin. I'm thinking about replacing them with some reflective vinyl whenever she gets more.

 

Here's a before and after trd pro fox shocks

 

fab fours got it shipped in bare metal and colour matches it to the truck and the cutting was very easy used a dremel but the bumper hides all the cuts so even if you messed up it’s pretty forgiving
Instructions are really straight forward but I did not remove the bumper like it wanted me to saved a few steps and less messing around
With plastic clips

 

Installed SSO Slimline bumper.



EDIT:
Installed Stage 2 the next day.

 

Haha, A+ plate. Glori-Gloriaaaaa