What Have You Done To Your 3rd Gen Today?

Truck looks good!

I've found the 4runner pro wheels for $625 even, brand new in boxes, locally... And the toyo AT3 tires say 7-10" wide wheels.... So I'll probably go with them. Loads of people have ran these 7" wheels with 285s on the 4runner boards and I can't find any instances where someone popped a bead or anything... So should be ok... Hopefully LOL

Wheel width and offset combined with the CMC, might not have any issues with rubbing in the front.. still might, I don't mind some trimming, but the less the better.

 

My first Tacoma turned 1000 today! So I gave her a wash as a present for this most auspicious occasion.

 

Replaced my cracked original taillight with a set of “pro style” taillights. Not sure how I got the crack, just noticed moisture in the lights one day and noticed an inch of the plastic missing near the corner.





Since the lights were out of the way, finished the install on my total chaos bed stiffeners. Three bolts need to be tightened with the lights out of the way. @TOTAL CHAOS

 

Because they are not recovery points. They're cosmetic.

 

Added a little more interior blue to my true blue truck.

Learning how to carefully get in my truck after installing the seat jackers!! Found I can’t be as fast as I used to be. Put a second set on the passenger seat.

 

Thats a good price. Makes the decision easier for sure. I know many have run that combination but I just couldn't do it myself plus I think the offset is a little different to give a slighter wide stance. Post pics when you're done. I'm sure it will look great.

 

Nice work. Mine has been sitting on the floor, unboxed, taunting me while I wait for the weather to cooperate.

 

Oil change day. Over tightened the drain plug in the oil filter housing 2 oil changes ago. I replaced the plastic housing with the aluminum one.

When you don't have a bench vice but have a tacoma frame and 3 ton floor jack.

 

I relocated the 2 by the fuse box, then there are 2 for automatic trucks trans and tcase. 3 for manual trucks 2 for trans and 1 for t case. I can do a write up if need be. They are located on top of the trand bell housing, if you look down from the booster you'll see them. I pulled the breathers off T fitting to 1 line then split it at the mount itself.

 

View

 

I didn't know we needed to do this as well besides just the rear axle housing.

 

Shout out to @Texoma for Shocks/struts, westcott kit, UCA’s and add a leaf install. Very professional, would highly recommend. Second shoutout to @DownhillDragon for a sweet OV tune. Significant difference would also highly recommend. Glad we have TW to connect!

 

Performance Pedals w Black & Silver (counter sink & grid finish). Took about an hour -

 

Started the diy 9H ceramic coating process.

 

This is the exact stance and lift setup i'd like to get, but without UCA - any updates for us?

 

Welcome to TW!

 

Finished up my cook lights. Fully adjustable. Wired to a switch in the cab.
With a little help from my 3 kids. Oldest was eating lunch when I finished.


And in case anyone wants to know the parts used...here you go!

 

Did the AC drip mod today. Luckily no rust yet (only 10k on the truck, bought used with 8k on it).








And a pic of the chrome delete on the bumper caps I did a few weeks back.



My first and only mods so far. Now to wash her.

 

Playing catch up now that it’s paid for!

 

Added a Softopper and rigged up a removable 3rd brake light.