Ontario BS Thread

This is why it's good to do suspension mods and upgrades when the truck is new - the fasteners aren't rusted and you can use Fluid Film or grease on installation to prevent seizure later.

 

So like premodded for your protection then. Still love stuff you can grease.

 

Love those ramp/stand thing-a-ma-bobs... gotta make a set now

 

guys I just ordered this relay
https://www.etsy.com/ca/listing/531263976/12vdc-dpdt-relay-with-flyback-diode?ref=hp_rv-1

to do this mod
https://www.tacomaworld.com/threads/locker-anytime-mod-for-dummies-2005.353724/

anyone interested in doing the mod together let me know

 

These showed up yesterday. Opened the box so they can thaw.

 

The Eagle has landed! 2 more to go!

 

I see a problem here...

 

Dare you to put a on that Rascal with just a single key.

 

I has no faith in locks...I pick these on a daily basis lol

 

Que?

 

I hafe no problem (spoken in best greek accent)

 

So maybe I could interest you in a ‘lil one time side job. Would have to be nights tho.

 

yeah, I was talking about that, the.... you know, this....

Oh look, a rabbit...

 

Ran the same part numbers (minus the cryo treatment) on my previous truck. They are pretty sweet without going larger. The slots help evacuate mud from the pads...

 

Really lookin’ forward to the install c/w the TRD pads. Got the perfect break in stretch of road right close. Just gotta do it at like 2AM or somethin’.

 

From what I recall, those worked real well saving your front end...detrimental to your rear end.

Now your in a TuRD gen! Bully for you!

Was in brampton this w/e and really wanted to off the winter boots. Your old factories are not in Brampton, so I slapped on my old Sport factories with the orig Firestone LE2 paper bags that I havent had on since Nov 2017...with reserve gas (still winter blend, but at 1.00 per...so...) did 9.9 per hundy back down.

Hate the 17" (same as my snows) for ride, 16s OR is noticeably smoother ride. I'll ride these for a couple weeks, highway tires for the highway roll resistance factor is a fun experiment.

On to the brakes...i always was always led to beleive slots are for more rapid cooling under harsh braking conditions...I did the big break conversion of the calipers with oem rotors on my 99 4Runner, opting to bow away from the slotted alternatives. Not doing to many S turns at top speed in that buggy lol

Still say you should have gotten the MT

 

Does anyone have a link to the adapter for the redarc brake controller? I wanna avoid splicing wires.

 

Everything said.....he still wants to steal my rims and rubber!

 

The disclaimer for this mod has another rule missing:

Besides rule #1 - don't be stupid.
For people like me it should have a rule #2: not advisable to forgetful or distracted people.