What Have You Done To Your 3rd Gen Today?

Thats a good price. Makes the decision easier for sure. I know many have run that combination but I just couldn't do it myself plus I think the offset is a little different to give a slighter wide stance. Post pics when you're done. I'm sure it will look great.

 

Nice work. Mine has been sitting on the floor, unboxed, taunting me while I wait for the weather to cooperate.

 

Oil change day. Over tightened the drain plug in the oil filter housing 2 oil changes ago. I replaced the plastic housing with the aluminum one.

When you don't have a bench vice but have a tacoma frame and 3 ton floor jack.

 

I relocated the 2 by the fuse box, then there are 2 for automatic trucks trans and tcase. 3 for manual trucks 2 for trans and 1 for t case. I can do a write up if need be. They are located on top of the trand bell housing, if you look down from the booster you'll see them. I pulled the breathers off T fitting to 1 line then split it at the mount itself.

 

View

 

I didn't know we needed to do this as well besides just the rear axle housing.

 

Shout out to @Texoma for Shocks/struts, westcott kit, UCA’s and add a leaf install. Very professional, would highly recommend. Second shoutout to @DownhillDragon for a sweet OV tune. Significant difference would also highly recommend. Glad we have TW to connect!

 

Performance Pedals w Black & Silver (counter sink & grid finish). Took about an hour -

 

Started the diy 9H ceramic coating process.

 

This is the exact stance and lift setup i'd like to get, but without UCA - any updates for us?

 

Welcome to TW!

 

Finished up my cook lights. Fully adjustable. Wired to a switch in the cab.
With a little help from my 3 kids. Oldest was eating lunch when I finished.


And in case anyone wants to know the parts used...here you go!

 

Did the AC drip mod today. Luckily no rust yet (only 10k on the truck, bought used with 8k on it).








And a pic of the chrome delete on the bumper caps I did a few weeks back.



My first and only mods so far. Now to wash her.

 

Playing catch up now that it’s paid for!

 

Added a Softopper and rigged up a removable 3rd brake light.

 

Had to gut the interior after the incident where I got stuck in a lake (Instagram @jwizzmasterwet for more on this!)

Took advantage of the situation and installed Noico 80mil deadening and 150mil Insulation.

 

I put the X15 on my 2021 TRD Sport and love it. It sits right flush with the bed and the material has a texture to it that is much nicer than just vinyl. Best part is that on Tacos the X15 does not use clamps, rather it comes with brackets that bolt into the bed rails for a real custom fit.

 

Posted the topper yesterday, but just added a nice couple coats of black paint, and some tint to one window (next one tomorrow). Looks better IMO with no bare aluminum/silver.

 

How's the fit on it since it's a second gen topper?

 

fits perfectly, just trimmed about 1/8" off the rear window frame on the bottom, wish it was 1-2" shorter but no real gaps or any fitting issues