Fitting 35’s with minimal trimming NOW ADDING LONG TRAVEL AND 934 CV’s

That looks nice. Makes me wish my wheels weren't so aggressively spec'd so the poke would be less ridiculous,

 

Wait, you guys have money?

 

What backspace are the wheels?

 

not after I pay @81Trekker

 

method 701 17x8.5 4.75"

 

Nope that’s why my truck is still broken

 

I'm just trying to work enough OT to pay @81Trekker

 

I didn't buy it solely for this. Lots of cutting to be had.

 

Im in. URE gets old after awhile

 

What CV boots do you use on your axles?

 

934 boots for the inners and OE Toyota for outer

 

‘Twas I. Thank you! Do you have a link to more pictures?

 

I run that whole place forwards and backwards in about 5 hrs

 

there's tons of pics of my tacoma in this thread and if you Google "Kasnerd build", my thread on another froum is the first hit. posting links to it is verboten here and the software automatically filters it out.

 

You could have it linked in your signature

 

better?

 

Right now I have 35s on level 8 mk6 with -10 offset and 0.75” spacers to clear the UCA. I’m trying to figure out how the poke compares between what I have now and the 2.25” kit with the smallest offset wheels that will clear 35s and if I get real cray cray 37s...trying to keep the poke in control. It’s vanity, but I’m a pretty aesthetically motivated individual.

 

these trucks aren't able to handle 37s on OE drivetrains unless you are prepared for the carnage and fixing it when it goes kaboom. YMMV depending on use.

 

2.25 kit 4.5” BS wheel with 315/70/17 camber at -1 degree and low ride height

 

What width wheels are they???

Go look at @WormSquirts although he's running 4.75 BS wheels which caused a rub 4.5 you can do all day. He's on 37s. Also he may be the guy to get some wheels from even though he's in the great white north.