What Have You Done To Your 2nd Gen Tacoma Today?

I've been having the exact same issue and I'm basically being told theirs not much I can do about it. One shop said they would look at it, but for another $100 alignment.

 

got the OME 884 springs, Deaver AAL, and Bilstein 5100s installed. Pretty happy with the stance.

Here it is alone and then one next to the stock 3rd gen SR5 at my office.

 

What bed shelf is that?

 

HeadlightService harness came but no OSRAM headlight bulbs yet.

 

KBVooDoo

 

Fixed my left rear window. Window got stuck halfway down. I pulled the door panel off to diagnose before realizing I could swap the passenger side switch to test if that was the issue...rolled right up.

Since I have the panel off though, I figured I might as well throw in some speakers. The passenger rear has been blown for a while. I got a pair of Rockford Fosgate speakers for about $50 on crutchfield, including the quickconnect harness and adapters. That seemed to be a deal worth taking in my eyes.


In the next couple weeks I'm getting the roof repainted. The truck is fine but the California sun beats up the roof specifically on these trucks. I'll have them tackle a few other scratches while they're at it.


I plan to sell the truck in 3-6 months. I originally planned to keep it roughly 4-5 more years, but family life is showing a full size would be good at this point.

 

Thanks!

 

Got new rubber yesterday Falcon Wildpeaks do get a little rub at full turn. 265/70/17

 

5" (5600 lumen each) led lights & harness showed up today before I left for work. I might wire them up when I get home.

 

Modded Tacoma down at 4:18. Anyone on here?

https://www.youtube.com/watch?v=qXDPOs6KJi4

 

I want to know if the taco owner at 6:55 is here

 

Lol yeah that pretty bad.

 

Took the front end apart to do a few things.
- new headlights (had a ton of condensation in one)
-larger transmission cooler
-cab mount bushings
-steering lines



looking forward to doing the bushings, they’re all pretty bad. This is the drivers side radiator one

 

Nice. I did my radiator core support bushings in the fall. The stock ones looked awful, like yours. My bushings under the cab were fine though

 

my front most cab ones are pretty bad rears aren’t awful but I ordered a full poly kit so I’m just gonna do them all at once

 

Solid plan. I also bought the poly kit, but I ended up doing a cab mount relocation on the front cab mounts and that kit came with it's own bushings. So far I haven't gotten around to doing the rear ones. One day, though!

 

Installled my hood scoop decal today! Came out really good, can't wait to drive in the morning and test it out without glare

 

My truck doesn't have those pockets...

 

Did it to mine.....no glare, you’ll be happy.

 

Got the spark plugs done at 25k.