Ontario BS Thread

what's that?
an offshoot of BDSM?

 

I left the sensors in the original bumper and put it in the aftermarket box that the new bumper came in.

Used techstream to have the body control module do a relearn so it "forgot" about the BSM modules ever being there.

 

It’s the thing that Beeps when you back up.

 

???
I only feel a hit and it stops. no beeping....

 

Works like a charm then.

 

Which one do you idiots think looks better?

 

The clean one

 

+1 for the clean one

 

Pic 3.
Black rim red TRD

 

I agree

 

TRD ones, I had exact the same on my rims before

 

This! X2

 

What's popping fiends, any one know of a decent set of shackles to lift the rear of an 02? Also my god I missed some shit.

 

I think OME and daystar makes some. If I remember correctly, I think you can run xj ones too. Think 1.5” to 2”. Out of my wheelhouse though. So take that for what it’s worth which isn’t a whole lot.

 

Sounds good, a friend gave me some rear Billy steinny 5100s, instructions say they need at least a lift block.

 

if they are much longer then stock then most likely. Could also cheat and just run larger bunps and loose some uptravel. Not ideal. Think when I checked Amazon, they could be had for $200.

could also make some but by the time you get bushings and what not it may not be worth it.

 

@Saturnine This is a match made in TRD heaven

your ACab rocks

 

Not sure if this helps but I will chime in. I did a full OME suspension 10 years ago with 881 coils. These are the grease-able shackles that came with my kit.

Second picture is a back up set of bushings I purchased at the same time and I will likely have to change them out at some point… Probably when I put my AAL’s back if my Dakar’s ever sag. Seems like my mini truck is pretty easy on suspension and I only really seriously wheel When I’m fetching up firewood or trying to get close to a deer I just killed.

 

Black trd

 

Those are parking sensors. Most aftermarket bumpers cater for these, just little circular holes on the bumper face for the sensors to snap into.

KBOX was asking about blindspot monitoring, which are the sonars installed in the OEM bumper corners. The sonars can only work through non-metallic surfaces. Most aftermarket bumpers don't cater for these.