GA Tacoma Owners BS Thread

I thought this was only a 3rd gen thing?

 

3rd gen for now.
OVtune is working on support for 2nd gens as we speak. There are over 100 different ECU IDs for 2nd gens alone that he has to decipher and recode for his software THEN build base tunes for. I'll make sure y'all know when that is done.

2009-2018 4runner tunes are half tunes right now. The ecu has changes done for power delivery but we are waiting for him to unlock the TCU so we can adjust transmission mapping.

Tundra tunes are off and on available. One days he'll post that you can buy, the next day they are taken down. That alone has steered me a little off of it. Waiting for some consistency there before dabbling.

But, hell yea @Built2Ride im glad this tune is doing a little something for your rig. After you put some miles on that tune just let me know where you want to go with it!

 

Anyone up to help me do UCAs/one LCA/One CVJ this weekend or Friday? I will provide beer!

Got into a fender bender 2 weeks ago (other person merged into my wheel), so I ordered JBA UCAs, new LCA, Tie Rod and CVJ.

 

Lookin good bro! Still awaiting your honest review in those leaf springs. Looks like you got it leveled out nicely. How does it ride?

and you are not alone in the search for the rubbing

 

What suspension set up are you running and what tire size is that? Looks great!

 

X2

 

Leaf springs are great. Stiff n bouncy with no bumper yet. Measuring around 28” center of hub to a trimmed fender flare. Side note I loaded the truck with 40 bags of mulch that was wet and it dropped me to 25” hub to fender which would be about an inch higher than the front. So I’m excited to get my rear bumper in and on.

 

Thank y’all. It’s Dobinsons heavy leafs, b110’s and Dobinsons mra adjustable front coil overs and jba ucas. Feels good so far. Can’t wait to add more weight to the rear tho. Have 315/75r16

 

The meats!

 

I might have to look into those leafs... My icon RXT on stage 3 (heaviest rated config) have sagged with all the weight and I’ve lost all rake...

 

You 4runner owners, do y'all know if steps off a 2010 4runner will fit a 2016 4runner?

Edit: figured it out, they are nfab steps and nfab steps for sr5s range from 2010-2013. So doesn't seem like they will fit my 2016 sr5.

 

they should.

 

You might should look into the firestone ride rite w/ daystar cradle setup.

x2. I don't think the mounting points on the rocker panel changed at all between 2010 and 2016. Of course, you could just skip the steps and get sliders. I really liked the Shrokworks with fill plate (flat) that we had on our '14.

 

Not according to Nfabs site

 

Well I found the steps on facebook for $250.00 and these are for my wife's 4runner. She don't need sliders.

 

Yet.

You could always make an offer contingent on if they fit.

 

He's close by, so I'm just going to see if I can take the 4runner over there and test fit.

 

are most post showing up backwords to everyone else or just me??? April fools maybe?

 

It’s the latter

 

lol looks like someone's fucking with you at work today