What Have You Done To Your 3rd Gen Today?

This is motivating AF. I'm editing as I type here. Trying to shave off some time at this point, it's a long video.

 

Installed the raptor style tail lights today.
https://caliraisedled.com/products/2016-2020-toyota-tacoma-raptor-style-tail-lights
Waited until the sun wen’t down to get a night shot. I like them better than the OEM lights I tinted.

Still looks cool even on April Fool’s Day with the grayscale theme

 

You can do it that way, and videos online cover the manner in which you did it as well. As opposed to risking breaking clips off, I just went ahead and disassembled the entire thing. With painting and everything it took me four hours at most.

 

I replaced both caps and never took anything off. You can just pop the clips off and tug the covers off. Disassembly and reassembly was maybe 30 minutes

 

Didn’t take me much longer to do it the “right way”, in my experience sometimes removing a few more parts makes the whole job a lot more bearable, don’t have to attempt to reinstall clips with little to no finger room.

 

Mmmmmm, 1st gen put a virus in the 3rd gen forum I heard

 

definitely have some rubbing I need to address and order my cab mount relocation. But these trucks look perfect on 35s vs 33s

 

So with removing the top you can access the metal clips? I would have done it that way if I knew that

 

April fool's joke on 3rd genner's...

 

Damnnnnn that’s sexy. I’m jelly. Nice upgrade.

 

Yes there is! It’s an option on the order page. Grill is cut out for it as well as the bracket is prepped

 

I’m assuming you’re referring to the razor blade looking things, and yes when removing the entire bumper end you can access all plastic clips and those metal ones as well.

 

Hm. Too late now lol. But no wobble so no big deal. Good to know though. Thanks.

 

Hi there, those are Clazzio Leather, black color with red stitches.

 

Front and rear?
How many miles?

 

Might want to add an aftermarket power steering cooler from Derale or Hayden with those 35's in the summer heat. You can even use a frame rail transmission cooler or get one with a fan if you need something larger.

 

I’ve never heard of this being mentioned for 35s. My list of parts for my 35” tire journey continues to grow

 

I'm sure drivers with 285's or 33's could benefit from one as well. Heck, the factory trans cooler is pretty tiny too. They don't cost much $30-$40 for a basic one or about $150 for one with a fan.

Cheap:

$40 Derale 13200 Power Steering Cooler Kit, Black

https://www.amazon.com/Derale-13200-Power-Steering-Cooler/dp/B0006HNM66

Not so cheap:

$200 Fluid Cooler and Fan, 15-3/4 x 11-1/2 x 5 in, Tube Type, 6 AN Male Inlet/Outlet, Fittings, Aluminum/Copper, Black Powder Coat, Universal, Each

https://www.amazon.com/Derale-13700...15d3f669bf7&pd_rd_wg=z0USe&pd_rd_i=B001QITRBS

 

Wiped/cleaned under the hood to matched the exterior color.

 

You can also just buy the bumper covers: https://www.ecoological.com/bumpershellz.html