What Have You Done To Your 3rd Gen Today?

My bad was looking at a different fuse diagram. Could always just pull them one at a time and check with a multi-meter

 

Installed an ARB compressor using the Running4Tacos behind-the-grill bracket with modified mounting hardware...

 

Door panel illumination is on same circuit as dash illumination...

 

Installed full set of CBI skids powder coated in TRD gray...

 

Installed the CBI ham radio antenna mount...

 

I was just about to say that. I have isolator rings on mine. The D rings don’t move unless you want them to.

 

P/OUTLET NO.1 It's the power outlet fuse, it's hot on acc and run and it's not tied into any of the ECU's in the truck. You pop it and all you lose to is the power outlet/cig lighter.

I used it to trigger a 40amp relay that feeds power from the battery to a Blue Sea fuse box under the hood. That way any accessories I add are "stand alone" from the ECU's that run the rest of the truck. A lot of people use an "IGN" fuse, or something similar under the hood. If that blows you're dead in the water.

 

I love watching his videos. Man oh man, some people are fu*king nasty. I sometimes wonder what the point is though. When the vehicle is that bad, I mean like disgustingly gross, it’s not like the person is turning over a new leaf. The car is gonna be that bad again soon.

 

what brand of yellow fog lights are those? i really want to change mine out, but i see some from several different vendors.

 

Highly recommend this thread. I learned so much. I was able to make an informed purchase for Fog's and I'm very happy with the end results.

https://www.tacomaworld.com/threads/the-led-sae-j583-fog-pod-fog-light-review.554813/

*Edit* Coles notes: this is what I did.

https://www.tacomaworld.com/threads...og-light-review.554813/page-238#post-25393994

 

Thanks for the info!

 

I have dash illumination, just don't have door panel or switch illumination.

 

I’d guess the dash is “METER”

 

I’ve started the construction of a kayak rack.

 

CaliraisedLED Raptor Lights. Super easy install too. Took maybe 20 minutes. There’s a YouTube video at the bottom of that link.

https://caliraisedled.com/collectio...6-2020-toyota-tacoma-raptor-style-tail-lights

 

Hopefully this doesn’t come off the wrong way but have you pulled any of the fuses to check them? Usually you can see a blown fuse through the back of the fuse.

 

I did but the damn things are so small I could have easily missed it.

 

Meter is Combination meter juice. gas, temp, rpm, etc.

 

Ok. I’m sorry and am truely trying to be helpful.

 

Pull the fuse and replace with known good one...