Eibach pro lift kit

My tow was pretty bad as well and my caster wasn’t too bad.

 

Cool. I’m near Lewistown. I’ve had an 1.5” rear block for a year with zero problems and I have my truck off the beaten path on a regular basis.

Rear blocks are cheap, easy to install, and the truck still rides great. The other leaf-style options increase rear spring rate while providing lift. If you need that increased rate, they are a great option. If not, they give a stiffer ride. A small block works perfectly fine, despite what many on here like to say.

 

I don't do much off road and my 2012 and 2016 both had blocks with no problem.

 

What brand block you running?

 

1.5” MaxTrac

 

Tacoma Beast has this in sale on their website right now by the way. For whoever is looking into it. Not a huge sale. But worth looking into.

 

Did you leave the overload leaf in? I’m planning on the same set up. Do you have any side shots? I’m curious if it sits level or does it have a slight rake?

 

Installed the front on the second clip, have that Carolina bro lean going on right now, add a leaf is on back order. Definitely agree with the consensus of the stiffer feel in a good way. But they felt great crossing over three sets of rough railroad tracks. No diving when I hit the breaks anymore, and turns feel great! I’m happy without breaking the bank!

 

I was looking at the Eibach pro lift stage one and called them directly. The rep said that the stage one is up to 2 in the front and 1 in the back. However the stage 2, which is double the money, goes up to 2.5 in font and 1.5 in the back. For some reason, I thought that forum users were stating they were getting 2.5 in front off the stage one lift. Any input from anyone?

 

2 inch is the bottom notch, there are 3 notches you can put the snap ring in for the spring perch, going up a notch gains more lift. Eibach only recommends doing that if you have extra weight, but many people on here have gone 2nd notch/clip (~2.5 in of lift or so) without any weight just looking back through this thread.

 

Okay cool. Yeah I spoke with one rep and that's what she said. After seeing this, I called back and got someone else, who confirmed what you said. Thanks. Good looking out.

Quick question though. What about a 1.5 in block in the back? The webseits says 0-1 in the back

https://eibach.com/us/1920/E80-82-069-01-22-TOYOTA-Tacoma-pro-truck-lift-system

 

Stock alert for those looking for this kit. They now have 5 available (because I just bought one!) over at www.yotamafia.com

 

4wheelparts called today. Placed my order in early February initial ETA was 2 weeks now 2 months later ETA mix June smh idk if I should wait or go different route

 

I contacted these guys this afternoon and after these 5 are gone they won't have stock until May/June.

Quick link: https://yotamafia.com/product/eibach-lift-kit-stage-1-tacoma/

 

I mean if someone posts that another company gets them in or you notice, see if you can snag them before they run out then cancel the order at 4wheelparts. I got mine to my door in less than a week 2 weeks ago from tacomabeast.

 

Yeah it makes no sense why they would tell me 2 weeks, and then 2 months later 2 weeks again and now they said 3 more month. The thing is I ordered thru them because they were doing my install but make no sense how they're not able to get a dam kit in stock being a huge company

 

To be far, these are out of stock at a lot of bigger stores. Tire Rack had a few come in a few weeks ago and they're on back order now.

 

Right now trying to see my options for an alternative, I was really sold on eibach but I can't wait another 3 month. There not many options at my budget, bilstein is also 3 month back ordered

 

Im no dummy around tools, but I’ve never worked on anything like this before. I’ll be honest if you have tools this is extremely easy to do. I used this step by step write up very straight forward.
https://***************/2020/02/26/eibach-pro-truck-lift-install-3rd-gen-tacoma/

 

Ok that didn’t work but it’s the trail Tacoma website if you google eibach Tacoma instal