What Have You Done To Your 2nd Gen Tacoma Today?

I should have did this years ago

Vehicle OCD - Center Console...

$20 Vehicle OCD - Center Console Organizer for Toyota Tacoma (2005-2015) - Made in USA - SLX100

https://www.amazon.ca/dp/B00A5UEOLG?ref=ppx_pop_mob_ap_share

Before


after


I have the tray coming as well should be a nice little addition keep things organized

 

Nope this is my bumper. Eventually I'll add some tubing for more protection. When I plated my frame I removed the stock frame bolts that any bumper would bolt to so I welded on a new cross member an am building off that.

 

I’d say they’re a DIY project if you have all the tools. You’ll need a torque wrench that will go to 150 ft-lb & 32mm socket & grease gun with proper grease. Then you need to get it aligned.

 

Don't forget the glovebox!

 

Good call this looks handy

$21 Vehicle OCD - Glove Box Organizer for Toyota Tacoma (2016-2023) - Made in USA - SLX144

https://www.amazon.ca/Vehicle-OCD-Toyota-Organizer-2016-2019/dp/B07BH49SHC?ref_=ast_sto_dp

 

Given they are aluminum it’s not like they are going to rust anyway. I had the steel ones on my old truck years ago.

 

That's pretty sick, the other angle you had in the pics it looks great!

 

My old 88 4runner had a small trap door under the rear passenger seat that went directly over the gas tank. Had no idea about iit after having the thing in my family for over 30 years. Discovered it when I had to replace a cracked fuel line just to sell it. Sometimes you think wow, they have thought of everything! Then sometimes they make things that are the most common to replace over and over a royal pain access.

 

Received today item Safe Jack Starter Bottle Jack Recovery Kit with 6 Ton Omega Bottle Jack $161.10 direct from manufacturer—Cheaper than Amazon.

 

This is what I have. did you get the optional base plate?

 

Thanks I went alittle overkill but that seems to be the theme of my build lol

 

No, thought about it, but no. I have 2x6” redwood boards of various lengths that I use depending on the ground type. I also use the boards for my camper, so they are with me all the time. Since I contacted them to make sure I got the Omega jack and not the substitute, I should have asked if they would throw that in. But, they distracted me with discounts, price, and not getting the substitute jack....as they only had a couple of the Omega jacks in stock.

 

I was just looking at this kit...is there a link w the Omega jack or you had to call them?

 

I just installed my Squareone Creations frame caps. The open frame always bothered me & I have been wanting to come up with a solution. Then I ran across this product. Easy to install, but I did have to chase paint out of the threads with a tap.



Without cap


With cap

 

Installed my new to me Relentless Fabrication LO-Pro Bumper a couple days back (thanks again @TacoTyusday ). More of a test fit until I decide to mount my winch and replace the light bar in a couple weeks. Gave her a bath, and installed the slow open tailgate kit today.

 

Finally dremeled away enough of the dash switch to fit the very deep/large EATON e locker switch for my front locker. I was slinging a LOT of molten hot plastic around the cab Also built a lattice for back yard plants to go against the wall. This will get painted black

 

Brought home a sister for her today.

 

Jeeze... crowded.

 

Little clean-up, just before dark.

 

I don’t think they have any Omega’s left, but give them a call (509-736-1513) or put this here: “If you write a note in the notes box saying "please ship with Omega jack". We will make sure to ship with the Omega jack.” As far as discounts, you’re gonna have to get that from them. I would call or email them before placing an order online. Amazon is showing this product is unavailable and we don’t know when, blah, blah, blah....