1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: 2016 tacoma aftermarket suspension: remove leafspring or crank up the front? It’s gonna be a good night. I smell the gear oil already. LF fluid going back in Can I wire aftermarket fog lights to my factory switch? H11 to H9 headlight bulbs, what's the difference? Hitch locks dont fit Back Seat Backrests Storage Compartment Cover Mod Ideas?

need an inside 12 volt source for front/rear view camera...

Discussion in '3rd Gen. Tacomas (2016-2023)' started by yooper65, Apr 7, 2021.

  1. Apr 7, 2021 at 10:56 AM
    #1
    yooper65

    #1
    yooper65 [OP] Member

    Joined:
    Mar 30, 2021
    Member:
    #361063
    Messages:
    5
    Gender:
    Male
    First Name:
    Buzz
    Vehicle:
    2020 Tacoma SR5 v6 crew cab
    I am hooking up a front/rear view camera in my 2020 Tacoma and I would like to find good place, (easy to tap into) 12 volt source that is only hot when the ignition is on.... Is there anything under the dash or under the hood that would be good???
    I could use the cigarette lighter, but I would rather not have wires dangling all over the place.... any guidance would be sincerely appreciated.....
     
    yooper65, Apr 7, 2021
    #1
  2. Apr 7, 2021 at 11:01 AM
    #2
    tonered

    #2
    tonered bartheloni

    Joined:
    Sep 25, 2017
    Member:
    #231055
    Messages:
    31,167
    Gender:
    Male
    First Name:
    tony
    Lynnwood, WA
    The power port worked for me.

    IMG_20180106_121053.jpg
     
    tonered, Apr 7, 2021
    #2
    Jmac2408 and Skydvrr like this.
  3. Apr 7, 2021 at 11:10 AM
    #3
    yooper65

    #3
    yooper65 [OP] Member

    Joined:
    Mar 30, 2021
    Member:
    #361063
    Messages:
    5
    Gender:
    Male
    First Name:
    Buzz
    Vehicle:
    2020 Tacoma SR5 v6 crew cab
    Outstanding..... Now, how do I get that open like that ???
     
    yooper65, Apr 7, 2021
    #3
    tonered likes this.
  4. Apr 7, 2021 at 11:16 AM
    #4
    bacon_st

    #4
    bacon_st Well-Known Member

    Joined:
    Jun 10, 2016
    Member:
    #189261
    Messages:
    1,204
    San Diego
    Vehicle:
    16' Taco TRD sport
    Why not use an 'add a fuse' and tap into a 12v source in the kick panel fuse box?
     
    Last edited: Apr 7, 2021
    bacon_st, Apr 7, 2021
    #4
    stonylaroux and vicali like this.
  5. Apr 7, 2021 at 11:25 AM
    #5
    yooper65

    #5
    yooper65 [OP] Member

    Joined:
    Mar 30, 2021
    Member:
    #361063
    Messages:
    5
    Gender:
    Male
    First Name:
    Buzz
    Vehicle:
    2020 Tacoma SR5 v6 crew cab
    Another good suggestion, except I don't know my way around automotive wiring to know where to start doing that...
     
    yooper65, Apr 7, 2021
    #5
  6. Apr 7, 2021 at 11:31 AM
    #6
    vicali

    #6
    vicali Touch my camera through the fence

    Joined:
    May 20, 2010
    Member:
    #37503
    Messages:
    2,675
    Gender:
    Male
    First Name:
    mike
    Kam,BC
    Vehicle:
    2017 TRD Sport 1D6
    vicali, Apr 7, 2021
    #6
  7. Apr 7, 2021 at 11:32 AM
    #7
    bacon_st

    #7
    bacon_st Well-Known Member

    Joined:
    Jun 10, 2016
    Member:
    #189261
    Messages:
    1,204
    San Diego
    Vehicle:
    16' Taco TRD sport
    1. Just buy an 'Add a fuse' for toyota type fuses.
    2. Then route the cable from dashcam, tuck it under the head liner to driverside A-pillar,
    3. then remove A-pillar cover and run cable to the dash without obstructing the a-pillar air bag, and drop the cable end into the driver side the dash behind steering,
    4. fish out the cable end from under the dash from the footwell, and run it towards the driver side kick panel, zip tie whenever necessary,
    5. simply connect/splice the 12v positive wire/cable from the dashcam to one end of the 'Add a fuse' and connect the negative to the negative terminal against the frame next to the kick panel.
    6. remove the fuse panel cover and connect the 'Add a fuse' to one of the fuses that is only hot when the ignition is on
    7. Done.
    THis is what 90% of us with dashcams do. Simple and easy.
    You're imagining it's difficult. Honestly, it won't take more than 15~20 minutes.
    I'm sure you can find a YT video too. YOu just have to try a few fuses before you find the 'only hot when truck is on' fuse.
    Don't forget to add the fuse you remove from fuse panel to the 'Add a fuse'.
    YOu can buy an 'Add a fuse' from even Walmart or any auto parts store.
     
    Last edited: Apr 7, 2021
    bacon_st, Apr 7, 2021
    #7
  8. Apr 7, 2021 at 11:35 AM
    #8
    Josie_Cuervo47

    #8
    Josie_Cuervo47 Well-Known Member

    Joined:
    Jun 24, 2020
    Member:
    #332415
    Messages:
    86
    Gender:
    Male
    First Name:
    Kurt
    Bucks County, PA
    Vehicle:
    2017 Tacoma SR5 DCLB 4x4 Super White
    Josie_Cuervo47, Apr 7, 2021
    #8
    nathan298, Skydvrr, ORtoCOTaco and 1 other person like this.
  9. Apr 7, 2021 at 12:00 PM
    #9
    ORtoCOTaco

    #9
    ORtoCOTaco Well-Known Member

    Joined:
    Jan 18, 2020
    Member:
    #316468
    Messages:
    206
    Gender:
    Male
    Colorado
    Vehicle:
    2018 White Tacoma TRD Off Road DCSB 4x4
    BodyArmor 4x4 HiLine Winch Bumper, Warn Zeon 10-S, Uptop Bravo Roof Rack, ExtremeLED Super Stealth 40" LED Light Bar, DV8 Offroad 20-Inch BRS Pro Series LED Light Bar, Truxedo Roll-Up Tonneau Cover, Automatic Tailgate Lock, Trailgate panel, cheap Amazon ditch lights.
    I use this, too. It's awesome.
     
    ORtoCOTaco, Apr 7, 2021
    #9
    nathan298 and Josie_Cuervo47[QUOTED] like this.
  10. Apr 7, 2021 at 12:51 PM
    #10
    tonered

    #10
    tonered bartheloni

    Joined:
    Sep 25, 2017
    Member:
    #231055
    Messages:
    31,167
    Gender:
    Male
    First Name:
    tony
    Lynnwood, WA
    Looking inside the power port, you will see a square black tab on the bottom. There is a similar one on the top. Push both outward just a bit and pull the metal barrel toward you.

    From there, you can slide off the connector. The plastic cover will then pull out toward you also.

    The connector is easy to take apart, as seen in the pic. Pry open the two, small doors and release the small spring clip on the spades.

    It all goes back together like butta.
     
    tonered, Apr 7, 2021
    #10
  11. Apr 7, 2021 at 5:19 PM
    #11
    yooper65

    #11
    yooper65 [OP] Member

    Joined:
    Mar 30, 2021
    Member:
    #361063
    Messages:
    5
    Gender:
    Male
    First Name:
    Buzz
    Vehicle:
    2020 Tacoma SR5 v6 crew cab
    Thanks to everybody for their help,,,, I went with the "Add a fuse" option ....
     
    yooper65, Apr 7, 2021
    #11
    tonered and ORtoCOTaco like this.
  12. Apr 7, 2021 at 5:27 PM
    #12
    HAILST8

    #12
    HAILST8 Retired Munitioneer

    Joined:
    Mar 31, 2020
    Member:
    #323507
    Messages:
    107
    Gender:
    Male
    First Name:
    Russ
    Florida
    Vehicle:
    2022 Sport SWDCSB4WD
    Stock+
    I know you made a choice, but another option...
    I went under dash, then under center console around shifter, into the console storage compartment from underneath, then plugged into usb port. Super easy, invisible, no cutting, splicing, extra holes, etc.
    Just food for thought.

    Also easy to unplug it if security forces notices it on base.
     
    HAILST8, Apr 7, 2021
    #12
  13. Apr 7, 2021 at 5:29 PM
    #13
    Skydvrr

    #13
    Skydvrr IG: @kalopsianick

    Joined:
    Sep 13, 2017
    Member:
    #229889
    Messages:
    12,654
    First Name:
    Nick
    YMH
    Vehicle:
    Black '17 OR

    Where u get those lil pliers though :rolleyes:
     
    Skydvrr, Apr 7, 2021
    #13
    tonered[QUOTED] likes this.
  14. Apr 7, 2021 at 7:04 PM
    #14
    tonered

    #14
    tonered bartheloni

    Joined:
    Sep 25, 2017
    Member:
    #231055
    Messages:
    31,167
    Gender:
    Male
    First Name:
    tony
    Lynnwood, WA
    Hahaha! Shall we talk about it? :D
     
    tonered, Apr 7, 2021
    #14
    Skydvrr[QUOTED] likes this.
  15. Apr 7, 2021 at 7:11 PM
    #15
    Skydvrr

    #15
    Skydvrr IG: @kalopsianick

    Joined:
    Sep 13, 2017
    Member:
    #229889
    Messages:
    12,654
    First Name:
    Nick
    YMH
    Vehicle:
    Black '17 OR

    Do they work well on softoppers? :confused:
     
    Skydvrr, Apr 7, 2021
    #15
  16. Apr 7, 2021 at 7:11 PM
    #16
    tonered

    #16
    tonered bartheloni

    Joined:
    Sep 25, 2017
    Member:
    #231055
    Messages:
    31,167
    Gender:
    Male
    First Name:
    tony
    Lynnwood, WA
    Softoppers and hardtoppers.
     
    tonered, Apr 7, 2021
    #16

Products Discussed in

Dongar Dash Cam Power Adapter (12-pin Type A) - Compatible w Toyota Tacoma (15-23), select Highlander, Tundra, Sienna; Honda Ridgeline & more. USB Power, Connects to Rearview Mirror. Easy Install!
$36.99
To Top