What Have You Done To Your 3rd Gen Today?

How are you powering the dash cam ?

 

Impressive Excel sheet man. Well thought out and meticulous. Add in shipping costs, plus tax and install costs (if needed) and then your rolling cost (Projected vs Actual).

 

yeah, you're right on that! thanks...

 

Paid for the parts and scheduled my OME lift at Asheville Vehicle Outfitters

 

Installed a Meso Stealth knob! Left button triggers the ECT, right button triggers my garage door opener. Turned out great! (Dirty floor mat has since been cleaned, I know someone will point it out lol)

 

Testing my fuel economy with 91 with factory tune. Pretty good but only my first trip home from work so far.

note:dirty instrument panel is still dirty!

 

That's how I kept mine scratch free for almost 5 years

 

Cali Raised 25-degree Trail Edition sliders with no step kick outs (nothing is going on my roof in the foreseeable future). High and tight, which is what I was going for. Build quality and included mounting hardware is very good.

 

i LOVE how it harkens back to the 70's era Baja trucks...my uncle had an old Ford back in the 70's that had that same look...used to "tumble" down hills in that thing in southern Ohio

 

Just installed. Good budget option feels the same as the official TRD knob that cost 4x as much.

 

After seeing so many good reviews, I went ahead and got a set of the seat jackers. I was surprised by how much of a difference these make. Seat is a lot more comfortable than before, even with me being 6'1. No issues with headroom or anything...just had to slightly readjust my rearview mirror and good to go!

 

This just a straight swap? I want one but I see posts about needing adapters and shit. Mind sharing the link?

 

if you are overlanding, or camping and cooking without that pan, you are a poser!!!

 

used one of these Honda pvc grommets and one of them was a perfect fit.

 

Thanks! Link for the knob tho?

 

I laughed way to hard at this, I just re-watched that movie yesterday

 

https://www.ebay.com/itm/TRD-White-...Car-Racing-Gear-with-M8-M10-M12-/373442985383
Ask and you shall receive.

 

$10 DEWHEL Shift KNOB Boot Retainer/Adapter for Manual Gear Shifter Lever 12X1.25 (Black)

https://www.amazon.com/dp/B07MQ8MCQD/ref=cm_sw_r_cp_awdb_imm_APF02KHEKNBDKFJJZECH?_encoding=UTF8
I used this as well. Pulled up the center console (takes 2 seconds) then slipped it on. This is why my shift boot stays up close to the shift knob.

 

I have built a relay activated blue sea bus bar for the hot side battery power. I am using the amp trigger wire off my WC6600 head unit to trigger the relay. On the bus bar, I have my radar detector, dash cam, GEMS unit for front/rear camera anytime mod, and UHF radio.

$19 Blue Sea Systems 2314 100 Amp Mini BusBar with 5 screws and a cover

https://www.amazon.com/Blue-Sea-Sys...t=&hvlocphy=9013385&hvtargid=pla-436661250661

 

Slapped on my new skid plate today, it’s a good improvement over the paper thin factory skid