1st Gen Lunchtable Thread - General Discussion

Thank you, I posted another to help. But guess I'll back it off half an inch

 

Hows it line up at the back?

 

Sorry for the delay.. yea imma say that's way too close. This is mine

 

Haven't adjusted it

 

That is super Flippin weird.. that's a perfect line up in the back


Must've been for a different truck originally?

 

I honestly don't think its too bad, but its hard to get a feel for how close it is to the brake light. Do you know if that cap is for a taco?

 

My cap has a recess built in for the 3rd brake light. About 1 1/2" gap between light and cap.

 

Believe the folks said it was on a toyota pickup, pre taco

 

Oh and I looked under the cap and they already put weather sealer below there for the bed-shell seal

 

Wonder if I can sand it a bit there or if it'll gnar the cap

 

Ah that explains it. Pull the light, cover it in duct tape.

 

Yeah, pick up don't have 3rd light.

 

To get enough space You'll sand a hole in the cap trying to go that route

 

Back it off half an inch then? Think I can find thick enough weather sealer for the rear window to help

 

I'm just spit balling ideas this is my first cap

 

Yeah. You might be able to get away with a gap under the window, although dust would get in (more dust, anyway. Dust, uh, finds a way)

 

He's missing the front window on that cap, a half inch gap won't make the dust any worse

 

I live in the dust bowl

 

But yeah I need to put the shell boot back on the front for now, plexiglass will be fitted later for the front

 

Time to get out the jigsaw then.