What Have You Done To Your 3rd Gen Today?

I just did the same mod. This makes it super easy: https://www.ktjo4x4.com/tacoma-power-outlet-2016

 

Holly molly! That’s sure an expensive outlet. Mine was under $5 including the solder and heat shrink. 10 minute job including gathering tools and clean up.

 

Is Nacimiento Ferguson Road open now? It was closed just past Fort Hunter Liggett a couple months ago.

 

Based on other experiences I've seen around here, I would personally stay away from that business until they get their act together (KTJO).

 

The short answer is bleach bath to strip and adhesion promoter along with primer coat then after trying a black gloss top coat and a flat black automotive top coat I settled on matte black Rustoleum Painter's Touch 2X Ultra Cover Primer as the top coat because it had the right look. There's more to it and I could elaborate more later if you're interested. #likethebutter

 

Today's DIY project. ate em all up with hot sauce and guac.

 

I am the same with BMX...lived on a bike as a kid in the 70's/80's, and then my step son got into it about 10 years ago and it rejuvinated the spark...now I am 52 and falling off the bike, jumping, trying to learn 180's...what a great mid life crisis!!!

 

awesome!!! Thanks!!

 

uscargocontrol.com

 

I installed several lengths of L track in the bed two years ago. I used L track threaded studs from uscargocontrol.com to hold down the plywood that the Packout mounting plates are bolted to.

L-Track:
https://www.uscargocontrol.com/collections/l-track-tie-down-rails

Threaded studs:
https://www.uscargocontrol.com/products/l-track-double-lug-threaded-stud-fitting

 

Mounted a rtt and camped in it this weekend

 

This thread will be over 10k pages by the time I get on tomorrow. Who's it gonna be?

 

Anyone know where to buy a switch that will clip right into this location for a light bar? Measures 24mm x 33.5mm with caliper on bezel. I was in the middle of drilling hole to mount round switch and set it down. Now the people left and I can’t find it! I hate getting bothered in the middle of a critical mission lol


any links would be super helpful!

 

And 200,000 posts

 

Wanted to see how the far the stock suspension flexes - bonus points for having a bro moment:

 

Epic!

 

I think they might rub????

 

they make oem sized aftermarket switches so you dont need that round switch
Example:

$24 CH4X4 Push Switch for Toyota Tacoma 3rd Gen - Bumper Light Bar Symbol - Blue LED

https://www.amazon.com/gp/product/B01M9GYWLR/ref=ox_sc_saved_title_6?smid=A33BABJHV27JHT

 

Yes I saw those but sizes don’t seem to jive with my measurements and reviews said doesn’t fit oem hole so idk what to do.

Edit: has anyone used these and they fit?

 

Thank you, luckily I can get the lumber mostly free. It’s the getting my wife to buy in that’s the hard part.