17x8 moto metal 956 rims

17x8 6-5.5 moto metal 956 chrome rims for sale. They have a +18 offset. These are in excellent condition, not a blemish on them, never ran in winter. Went with a diff set up, need to sell. Asking 550 plus shipping. all resasonable offers considered.
call or text at (317-956-2010), or email me at busatodd@yahoo.com

THESE ARE SOLD PENDING PAYMENT

 

Any pics on the truck. I like the wheels but I'm not sure how that offset would look.

 

It would be similar to stock. +18 offset on an 8" rim is 5.25" backspacing.

 

If you go into my profile you can see bunch of pics. I put 285/70/17 bfg all terains, and no rubbing issues at all (with a 3" lift.) 265s fit with no lift. i have pis with and without lift in profile.

 

Are you sure they are +18 offset?

33's tend to rub with backspacing larger than 4.5".

 

yes, discount tire said stock rims are a +30, and these were a +18. the new rims i just put on are a -6 and they rub. Negative numbers hold tire out farther, (am i correct?)

 

Correct, the lower the offset, the more the tires stick out. But you can't compre offsets of different rims unless those rims have the same width.

FWIW I believe stockers are 7" wide, 5.5" BS which is +38mm offset.

 

im just going off what discount told me. the rims didnt stick out from under the truck any with the 265 tires on the moto metel rims. the moto metel rims are 17x8, my new rims are 17x8.5. i know i couldnt put my 285 tires on my stock rims (even with 3"lift), because they would hit my ucas. i had 1/2" between my 285 bfgs on the moto metal rims and uca.

 

Sorry for getting off topic, GLWS.

 

thats no problem, any info is good info. im going off what i was told, shouldnt offset be on the inside of the rims?

 

Yeah it should be stamped on them somewhere. Sometimes it's preceded by the letters "ET". So the stamp would say something like "ET +18"

 

ok thanks ill check it out

 

just checked it out, and it does say ET 18, but no + or - infront of it.

 

Yeah then it's +18.

So for anyone that asks, the backspacing is approx 5.25".

 

if you want to see some on a truck check out my picsin my profile, mine are 17X9.

 

Those are some nice wheels..I have seen them in person! Not a bad deal at all. GLWS Todd

 

thanks, hows that truck running, been awhile,

 

so just curious
you were running 265/70/17 on the motometal rims without a lift, and you had no rubbing?

 

No problem. Trucks running great from what the wife tells me. I've been deployed for the last 7 months, so the trucks in my garage and gets started/driven once a week.

 

yes but 265 70 17 and no issues