4runner trd pro retrofit

Used search. Does anyone know if 4unner suspension (4th gen) will work on a 3rd gen Taco?

 

Welcome to TW.

Try here
https://www.tacomaworld.com/forums/4runners.127/

 

To be fair, OP is asking about a Tacoma

 

@Superdave1.0 may know.

 

Some 4th gen 4R owners were reporting 1” lift up front from 2nd gen Taco’s parts. I’m assuming a 3rd gen Taco would give you 1” more than that. I believe the fronts bolt in, the rear will need a new or different bushing.
Visit the 4R forums and research there. I’m sure it’s been done.

 

Front fits. Rear shocks would need to be modified to fit. Lift height, valving, etc are different. This person did it:

https://www.tacomaworld.com/threads/putting-2019-4runner-trd-pro-suspension-on-my-tacoma.634072/

 

Oh shoot my dyslexia kicked in. I’m assuming even if I mixed up Taco-4R, it’ll work 4R-Taco.

 

I really appreciate everyone's Input thus far. Apparently the rears need a different sized bushing, does anyone happen to know that off hand? Will post measurements tomorrow.

 

Doesn't the 4runner have rear coils?

 

These are take offs from a buddies 4R there are no springs with them, but more than likely you're correct.

 

Yes, but it's the same type of set-up as the taco where the shock is independent from the spring.

Not sure of the difference in length/valving

 

Yeah, I just thought by suspension that it meant everything, not just shocks.