What Have You Done To Your 3rd Gen Today?

Easier to add bed lighting to the 18 then bed cubbies to the newer

 

Wait a fuckin' minute.... Your truck plays vinyls?!?!?!










Jk.
I'm not an idiot, geez.

 

Its steel, didn't feel bad about the weight since the stock bumper and tow hitch are 70lbs. If I did the math right, this is 125lbs so added 55lbs.

 

I considered that but something bugs me about losing fader ability. I'll give it a shot though and update.

 

They are OEM LED fogs

 

The link you provided clearly says halogen, just didn't want him to buy something he wasn't expecting.
Edit: I think I understand the confusion, it says both:

Manufacturer Toyota
Brand TOYOTA
Model Genuine Toyota Parts - Led Foglight Black (PT413-42191)
Item Weight 1.56 pounds
Package Dimensions 10.28 x 7.28 x 4.8 inches
Item model number PT413-42191
Is Discontinued By Manufacturer No
Manufacturer Part Number PT413-42191
Cover Included Fog Lights - Black
Bulb Type Halogen

 

I went with 5100’s all around and OME 886’s up front and the Headstrong Off-road 3 leaf progressive AAL. Got 2.5” lift in the front and just over an inch in the rear without the overload leafs.



Measures the same center of hubs to the fender wells front and rear.

 

No worries. To be honest, I didn’t even include that as a link. I just typed in the part number and Tacomaworld auto generated the link in my post haha

 

Will accessories that say they will fit a 2018 Tacoma fit my 2019 Tacoma? I wasn't sure sense they are all 3rd gen.

 

Just an FYI, I have an access cab so the rear speakers are mid way up the doors so approximately the same distance to the driver's ear as the front door speakers. I have my fade set to 1 notch to the rear and don't change it much.

 

Confused... my 2021 Pro came with the tailgate lock and bed lighting. Thought that was standard on the model?

 

Are you saying you did split the front speaker signal?

If not, you can set your rear fader all the way to the back and there will be virtually no volume.

 

They sure will.

 

I have not completed the project yet. The amps are mounted and the custom T harness from the HU to the amps I made up is done but not installed yet. This is the setup mounted on the back wall.

 

Makes sense, I'd do the swingaway on mine, so that's a bit more weight added. Looks great!

 

I made a harness so I didn't have to splice into any wires, a lot of soldering but worth it.
No lc7i for your door speakers?
You don't plan on having any fader control?
You will essentially be listening to everything "mono" vs "stereo" without an lc7i or new headunit, right?

 

It's got the black over coat peeling off. And I have this.

 

I'm going into the the LC7i, then Y splitter out to the 4 channel amp to the 4x speakers. Also, adding 2x 6.25" subs under the jump seats.

 

Gotchya

 

I put in two of the kicker hideaway subs. Not super thrilled with them either but truly I need to swap out my head unit before I put all the blame on kicker.