What Have You Done To Your 3rd Gen Today?

Yeah I'll probably make a swingout in the future, but for now I'll just throw the spare in the bed for wheeling and throw it back in the stock spot while daily driving!

 

did you replace your fog lights? or put a film over stock?

 

Very nice. One small adjustment you might want to consider is flipping the aux battery so that the positive terminal is towards the engine and the negative terminal is towards the sheet metal. This is the recommended configuration in case of an accident, the sheet metal fender would be better off getting pushed into the negative terminal of the battery and not the positive.

 

Put on some Falken Wildpeaks and put them to the test hauling about 1500 pounds of mulch.

 

Who else does the OV Tune in the DFW area? One person told me that Chris Marsh at Apex Automotive in Addison does it but no contact info on him yet? Got some questions about it.

 

https://www.tacomaworld.com/forums/texas.46/

 

Painted my own push start/4x rings. Still kinda looks like chrome in the picture

 

RCI 5* Kickout and top plate

 

Broke the black bracket on the passenger side headlight when taking them out. Can't be more than a $20 part or maybe I can just get a washer in there. But getting the headlights done tomorrow.

 

Milwaukee saw blades are quite good



Also secured the diff breather hose with a 1/2" nylon clamp, since the bedside brace was removed:

 

Thank you because I have been thinking about getting some bezels for the Tacoma but the item only goes up to a 2018. Here is the link: Triple Chrome Plated Taillight Trim Cover Bezel for 16-18 Toyota Tacoma | eBay which is the same picture as the ones sold on Amazon

$76 Razer Auto Triple Chrome Plated Taillight Tail light Cover (Chrome) for 2016-2017 Toyota Tacoma

Amazon.com: Razer Auto Triple Chrome Plated Taillight Tail light Cover (Chrome) for 2016-2017 Toyota Tacoma: Automotive. Just wasn't sure though.

 

I agree, I love the sound of it. And I don’t worry about the exhaust dragging on the rocks or getting crushed anymore. I’ve been asked a couple times about it from other Tacoma owners. Seems like the throaty rumble catches their ear and they’re wanting to do the same mod.

 

It is hard to see in the pics, but make sure the exhaust is not pointing directly at the shackle. It will melt the rubber over time.

 

I got a set of 2020 TRD Pro wheels from Craigslist for my Tacoma today.

 

"Upgraded" from the TRD Off-Road grille to the SR5 grille.

I had the TRD Off-Road grille derped, but it was starting to peel and I just didn't like it that much. Just about everyone goes with the TRD Pro, but I like this one.

 

Finished the bhlm. And gave the truck a bath to make sure they are all sealed. Good to go.

 

As far as I know the lights are the same on all 3rd gens so the bezels should be as well.