Eibach pro lift kit

Has anyone put a low pro bumper on with a winch with the suspension at the first notch?

I didn't really think I'd end up putting an aftermarket bumper on, but now I'm really considering it, but I don't want it to sag too badly. Overall weight of the winch and bumper should be about 135. Bumper will be a CBI stealth, and the winch will be a smitybilt x20.

 

Looks beefy

 

Thanks I'll be stepping up to 285's & AAL later after working on some trimming. Truck feels more like a truck now

 

I have a full SSO on mine. It's probably 100 and the springs don't budge. I'm second notch but I think you'll be fine.

 

Almost a year now

 

Rad, thanks for easing my worries.

 

Trying to find a 1/4" top hat spacer in Canada and am having no luck. Any idea's?

 

I didn't use one. It's level.

 

Did guys that switched from the stock TRD Off-Road suspension find that lift performed better off-road? Also, would this suspension we stiff going slow and dampen off-roading when going faster?

 

I am lost... some say they need it some say they don't. You are on second notch and how high is the rear?

 

Every truck is different. I'm 37.5" in the front and 38.5" in the back with a 2" add a leaf. Both sides.

 

Greenlane makes them

 

I'll get some pictures tomorrow morning after I run through a car wash. But damn, looks really good. Did 2" up front and 1.5" in the back. Drive home did 17.9 mpg according to the truck. Loved that I no longer dip while breaking.

 

17.9 mpg, how I've never gotten that Good since I've owned it unless I'm only going 55mph.

 

I have been wondering the same thing. Been out on stock suspension that seemed pretty soft in my opinion very comfortable and very capable. Installed my lift a few weeks ago but haven’t been off reloading with it yet and am very curious how it performs, especially with people saying it’s stiffer, witch it is.but nobody has really went into detail about it, YouTube videos weren’t very helpful

 

And here's some pics!

 

2nd notch / 1.5" wheeler's AAL

 

It looks good! I see from the previous post you decided to go lowest notch (2") with 1.5" AAL in the rear. Did you leave the overload in as well? Tire size? Still trying to get an accurate preview of how mine will look.

 

I got a 2.5” lift up front with this kit on my 2WD SR5.

Are the factory UCA able to handle that lift or do I better buy new ones before I get the alignment done?

I set the clip on the 2nd (center) notch with the Eibach springs. Got exactly 2.5“ lift up front with the added weight on my truck.

Front
before 35 1/4
after 37 3/4

The extra weight:

• $550 Body Armor TC-19339 Body Armor 4X4 Fits 2016-2020 Tacoma HiLine Series Front Bumper TC-19339
  Body Armor TC-19339 Hiline Front Winch Bumper
• 22" LED light bar
• 2x 3/4" D-Ring Shackle
• upTOP Overland Bravo Double Cab Roof Rack
  
• Oem TRD skid plate
• R4T LCA skids (their weight doesn't count)

 

do you rub when off roading with that set up?