3rd Gen, 3" Lift on 285/75R16's

Blue area when I turn the tire. Mostly the left part of the blue area. And it only rubs when the tire is turned and the shock is being pushed up a little. In other words normal turns don’t rub.

 

This is the most clearest explains by anybody!!! thank you for give me a image to know where I need to do!! Once again, Thank you so much for this. Im so ready to pull the trigger!

 

You’re very welcome. I asked these very same questions here about 10 days ago and didn’t get any answers except for “use the search function”. well I did and that proved pretty futile so I went to YouTube and that helped me out a lot more. I’m glad I did because it worked out perfect. I love my wheels and setup. I’m also glad I was able to help you so you didn’t have to do 12 hours of research like I did when all you really needed was a couple of questions answered that have probably been handled by literally tens of thousands of other Tacoma owners many of which I’m sure are members here.

 

Should I play gamble and risk by putting it on 305/70r17 or play it safe 295/70r17?

 

285/70R17

 

I'm on method race wheels nv305 with 285/75/16 km3's I have rough country leveling 3in front 2in aal rear I just returned from moab I had tires off ground full lock both ways 4lo I had no tire rubbing . New upgrade coming 295/75/16 and 6in lift I'm excited

 

Truck looks good. I was in the same boat as you and have just been watching to see if anyone replied to your questions with anything worthwhile which it seems they never did. Oh and the search function sucks, have tried it and got nothing in regards to this. Thanks for taking the plunge and trying it out yourself and reporting back with some answers though. Been helpful dude.

 

Thanks man.

 

I actually have the exact same setup but I have the TRD concept rims and I am rubbing pretty badly. Do you have any advance? It says I shouldn’t have to do any trimming.